shanYE west

The EK SRX chain is a VERY nice chain. Think I've bought about 30ft of it from you by now. lol

Greg and paula are awesome people. I wouldn't hesitate to have them do work for me. They have gone more then out of their way to make sure I was happy and if there is a problem. Greg will do what ever it takes to make it right.

yah.. that

What he said.. What size is this motor?

DEAL!!!

2,000cc's 2 Litres, 2 Quarts take your pic. I'm not sure dexron the best choice for wet clutch applications.. ATF Type F is fine.

The cylinders should be ported for the 4mil to correct the port timings.. There is another option.. but its not the best option. Also, You'll need domes cut for the added stroke and depending on which rod length you use. You'll need new pistons also. But no case work is "needed"

Save some of that time for Little Sahara!!

JT.. Boo may have a set of 10" rims... I'll check it out.

All PM's returned guys. And No.... my wife isn't pregnant..... . YET!

Not taking any trades at this point. First post states whats included. Only gonna be forsale for another few day get it while you can. I promise you wont this chassis wont be forsale again.. $2500 and I'll have the chassis sand blasted so its ready for a fresh Powder coat + I'll deliver anywhere in MI

LOL you fuckers and your muffins... LOL

how much?

bumpity bump! $2500

Get with FAST, He sells a EZ-pull lever that makes one hell of a difference CHEAP and the pull is smooth as butter.. Also, Remember to lube your cable and lube it often.. Even if its new.. They dont come lubed from the factory.

I'm using tusk kits in every one of my bikes.. ranging in hp from stock to 150hp. Ran them in my Dune port with no lock up wich was around 75hp. held like a champ for $50.. Dont spend anything over $100 on a clutch.. the $150 clutches are a waste imo and your just throwing money out the window.

lol yeah..thats a epic fail...

ttt

I got TONS of pictures.. so let me know if you want more.

Here is some pics of it struted in the rear for the track.. Ran straight as an arrow every pass.

Hate to sell it.. but... here it goes My ziggy chassis $2700 Gets the chassis, complete front end, steering stem, Drag tank and Torch works Radiator. Stem and lower arms are chromed, spindles are 5/8 and are powdercoated. All control rods and tie rods are polished. It has tabs on the sub frame for a wheelie bar also. Powder coat is in good condition not great.. has scratches and stuff around the engine cradle from puting the motor in and out. I can have it blasted before i ship/deliver. One of the lightest chassis I've seen. It weighed 235# with my 4mil cub in it. I'm willing to travel to help with delivery depending on where its going.

LOL i'm telling ya... that seriously need to be marketed! thas funny shit right there.

Yah.. I try not to be in that cloud.. lol

you can shut your mouth!

it was about 24-26 hr drive for me.