ElDiablo52

NO SHIT! I was actually wondering what the deal was with the sample of 5ft considering they sell in bulk and I dont need 100ft of hose and it was said that it was a sample and usaully samples are free, so basically Im just wondering if I can get 5 ft of the stuff and if I can how much is it, free or otherwise, then I will call the damn place and get some and then put it on and oogle my clear hoses.

bump Im interested in this new age ind hose

do they make a fusion clear coat. I just picked up some red and black but I couldnt find clear, they had textured metallic fusion and hammer tone fusion along with satins but no damn clear. Also do you have to use a wax and grease remover or does something like thinger or mineral spirits or something work. Im gonna go the whole sand the piss out of it route but I want to make sure that no wd-40 or amorall that may have been put on the plastics previously comes out and fish eyes the paint really bad

how much to do a set of expansion chambers in high temp chrome, and what do you charge for a bare frame in either a candy red or bright red with some flake. I can get the sand blasting done myself on both things. I know you sed to email you but I think it would be a good idea to list some basic prices for things such as frames, swingers, and A arms, and then if someone wants their right foot peg done in flip flop with a pear clear coat or something then they can email you. Just my couple of cents of course.

how do you go about getting the clear hose from newage and is it a free sample or does it cost a few bucks. I think almost 100 dollars for the clear hose kits is a rip off, its a damn rubber hose, thats like chargine 50 dollars for a 50 cent bolt that is chrome instead of black.

I gave rhino line a thought but then I had a brain fart, what if your frame cracked somewhere you would never see it because the bed liner stuff wouldnt crack so you could have a bunch of hairline cracks lurking everywhere under that stuff. Other then that I think a textured look on a frame would be pretty cool.

Do those flame and other design girlls have an affect on airflow to the point that it will cause a problem. I know banshees have an over heating issue to begin with and I ride mostly trails. I also live in Pennsylvania so the weather goes from 10 degrees in the winter to 80s and 90s sometimes in the summer. Do you think a flame one would give me any issues in the summer time?

Im tired of these damn phillips screws not to mention the A hole that had the bike before me apperently thought you only needed some of the cover screws or they just rattled out non the less, im in the market for some stainless allen screws for the clutch, stator, and water pump covers. Wheres the best place to pick up just the engine set. I found a couple on ebay but I dont wanna get ripped, I already went through getting F'ed around with by someone with like 98% positive feedback and over 1000 feedbacks, on a car bumper so Id rather here from you guys whos the best and it doesnt have to be ebay it could be a company just someone I can trust and have good prices.

That is badass I like everything but the color of the gauges and that yellow trim on the dash and door panel. Still fawken awesome. Eat you heart out mustang fans

Where is the cheapest and best place to get modquad billet stuff.

Go with Razr 2s I have them on all 4 corners and love them. I ride trails and feilds with a little play MX, and I have pipes and filter (boost bottle too but we dont need to discuss that) anyway im running 20x10x9s and I really like that size it doesnt look too huge and they give me pretty decent clearence although I do find myself dragging the swinger skid plate over some deep ruts and stuff. So if you ride rough trails I would bump up to a 22 in the back. But you cant go wrong with razrs, although I think the razr 2s hook even harder.

T5s are your best bet, Never ran anything else, but from my experience they really make the bike scream through the whole powerband. PT mids are extremely fugly looking but I guess function outweighs looks. FMF Gnarly pipes might be a choice they are made for more bottom, SSts are also made for a more toqurey power range however again I have never dealt with them myself and their quality seems to be something less than desired. If you have the cash I would suggest getting a trail port job done along with the pipes and a better flowing filter. Once again I only have ridden stock pipes and T5s so I cant really tell you for sure about anything else but I do like the power of the T5s. Moto fast 2 into 1 pipes seem to be a popular choice between MX and XC riders aswell.

so why hasnt anyone explained this whole balljoint deal. Im realling looking into this because Im not liking the ride I get out of the front shocks when going over small fallen trees and when hitting sharp ruts and stuff, jumping isnt bad because the bike lands more level and the shocks seem to work well together, but when you land on the front or the front hits a bump or such they seem be pretty harsh. I dont want to go any wider because Ive got barely an inch on either side through some spots on the trails, and the viable way I see spending the dough on a good set of shocks is when your switching to wider a arms to complete the whole handling set up. So the El cheapo 450 shocks seems like a great alternative.

I bet you could get the jack daniels graphics made somewhere theres alot of lesser known graphics companies that would take on a custom deal, and if you get them done in a batch you might even get a cheaper price and sell off the rest. Only thing is using the JD logo it might be trademark infringement but whatever just me .02 cents on the subject

any idea what they cost in US dollars?

too bad they are cut up, Id trade you in a sec, I dont like the colors on my bike (white and blue)

dos equis is a good dark beer, mexicans know how to get drunk the drink all day.

Seriously, Corona??? That shit is nasty, and its really watered down its like drinking high class Red dog... and MGD is shit too, Miller aint bad, michelob ultra is good too, but To be honest non of you are drinkers if your worried about the taste cuz the nastiest cheapest shit is what gets you drunk the fastest I.E. Keystone ICE, Best ICE, Natty ICE ect. and its half the price of a case of miller light, budlight, corona and shit. PLUS Jermey McGrath had bud light graphics on his KTM, and he is also the king of MX so shut up bitches. I will drink whatever beer I decide to buy, and I will get drunk from it, and I dont get hangovers to boot. (just incase you were wondering I dont just drink a couple beers and get drunk either, its a minimum of 7 or 8)

yup, tried EBAY, and Google, and alot of the magazine shops like ronnies mail order, dennis kirk, chaparral, and others. This sucks

I would stay away from heims if your a trail rider. They wont take the elements, now with the boots you might get by but they also will give you a harsher ride and more noise compared to a ball joint. Now with A arms, I would hope all manufactures TIG weld and heat treat their chromoly that is the only way to do it. When you weld chromoly you upset the atoms, and heat treating (when done properly) relaxes them helping to stop stress cracks from forming, And NHRA/IHRA both require chromoly cages and frames to be TIG welded so there must be a reason for it. Lastly check out Herrmann racing A arms, they have heavy duty ball joints, look super strong, and a pretty cheap compared to other manufactures.

anyone have a pristine set for sale? Come on I gotta support one of my favorite beers, plus my riding buddies would get a kick out of it (because they fit me well)

Where do I get the old One Ind. Bud Light graphics, did a google search and everything cant find them, Im sure someone has got these laying around somewhere.

Summit racing sells that stuff, its made mostly for alcohol to tame the smell and affects, but it works well in gas to and is very strong, they carry like 20 different sents and its only a few bucks a bottle and treats I think 30 gal of gas or 50 gal of alcohol. I know some people that run it and havent had any problems, and if your worried about deposits then I wouldnt listen to the other guys that say to run 927, itll gunk your top end up pretty bad if you dont tear your top end down and clean it inbetween rebuilds. And on filters I would stay away from the toomey 2 into 1 its junk and is I tight fit, but ya better replace it before you suck a chunk of that thing into your motor or worse a chunk of dirt or something.

hey it just hit me that they used to make bud light graphics for the shee, hmm Now I want them, I looked pretty hard but cant find them, chaparral, Rocky mnt, dennis kirk, moto-man, ronnies mail order, ect. cant find them, Any body know where they are hiding these kits? gotta be some still in circulation.

well if you have chrome T5s Ill trade you my black ones, they arent "bling" at all. Faded: how much was shipping and did they coat the inside aswell as the outside, just looking to get a solid estimate of what this is gonna cost.