jay shafer

U still need some 4mm cylinders. I have a dune ported set from Jeff @ F.A.S.T w/ pistons, rings and domes.

I stay in the DFW area and I was wondering the same thing. Looks like it will have to be sent out. Send it to Jim at passion racing.

What is the 41mm carb kit equivalent to in dual carbs.

http://www.planetsand.com/ubbthreads/showf...0/page/4#508421 I have also talked to Glen over at www.on-dunes.com.

R any of you guys going to try the new billet mini twister from Louie when it comes out? I hear its going to come like a kit with head, pistons, and cylinder for $1400. Really curious about this setup since the big twister runs like a scalded dog!!!!!!!! It supposed to come in 4, 10, and 14 mill.

Thanks guys!!!

the 7mm is play/drag ported w/ 65mm bore. the 7mm could easily be fully drag ported but for now its play/drag

What do u guys think about this comparison? Both bikes have cpi inframes, +4 swinger, +4 timing, and both run on race gas. The stock stroke cub has just a clean up port. In 300 feet drag and 1/8th mile ashalt with the both riders weighing the same which one do u guys think will have the advantage?

That is where i seen it at too, but now its not there. I had called he said something about a 41 also but never seen it on his site.

Isn't it a 41 single made also? I think Cascade was telling me that its one that big for the single carb kit.

Damn bro u need to find somewhere else to play. Nothing but grown folk over here.

If u look at planetsand and look at the usernames K&A Customs have used. U will see that the guy that just made this post in good sellers (billetlsr10mm) is the same as the user names on planetsand under the same person or persons as K&A Customs like (sandbanshee32). Real f*cking ironic. So that post in feedback good seller is bullshit. Billetlsr10mm and sandbanshee32 is the same person give himself props. IN OTHER WORDS WATCH YOUR PURCHASES from those user names here is all his users names from PS billetlsr10mm (# 17697) User billetlsr [email protected] sandbanshee89 (# 15394) User mobanshee89 [email protected] K&A Customs (# 16826) User arick [email protected] sandbanshee32 (# 9907) User banshee32 [email protected] -------------------- 05 banshee F.A.S.T. play/dune port!

Guys u know what is so damn funny about this post. If u look at planetsand and look at the usernames K&A Customs have used. U will see that the guy that just made this post (billetlsr10mm) is the same as the user names on planetsand under the same person or persons as K&A Customs like (sandbanshee32). Real f*cking ironic. So this post from the the getgo is bullshit. billetlsr10mm and sandbanshee32 is the same person give himself props. here is all his users names from PS billetlsr10mm (# 17697) User billetlsr [email protected] sandbanshee89 (# 15394) User mobanshee89 [email protected] K&A Customs (# 16826) User arick [email protected] sandbanshee32 (# 9907) User banshee32 [email protected]

Do a search for auto transports in your area or hers i'm sure u will come up with something. I think it might be a little expensive though.

23Champ who is denny and what is he running. Sh*t i'm still thinking about leaving this afternoon and going.

Who buddy deville from ssr? B/c i stay here in dallas. I'm thinking of sending it to cameron @ redline or jason at Vincent racing. I'm getting a 7mm motor built. I got the crank just need the porting and cases trenched. By the way i have some freshly ported 4mm stock cylinders from jeff at F.A.S.T that I may be getting rid of. I have cut domes and pistons for it. I was just missing the crank. I got a better deal on the 7mm and went with that.

I think u right. I'm thinking of running down there this weekend. Very very close to my home town,

A&S Dan Hull ran a 3.35 with there tripple!!!!

K&T just ran a 3.38 in 300ft with there Saberteeth big twin!!!

Thanks guys!!

No help on this guys?

Any info anyone?

What does everybody perfer as for tuning ease? Are lectron carbs easier to tune b/c of the turning of the needles rather than changing the needles in other carbs like pwks. The lectron carbs have a low , mid, and high needles right. Lectron users please chime in.

Was that w/ pistons?

If there are any of u 10mm stock cylindered guys runnin around. What kind of head are u guys running and who cut the domes.