FASTOYS

Agreed!! Have seen it time and time again.

28-30 mm pwks will fit stock boots fine! Need to look closely at the bottom of the boots and all around and check for cracks first though. 33mm on up require bigger intakes to fit correctly. Let me know if ya need em !!

For $300.00 we could hook you up with a Pro Design or a Noss head and a timing plate for advancing your timing and that will definetly help your HP needs!! A bone stock Banshee should have the crank welded as i have seen them come apart even in stock form !

Give me a holler , we got em!

Sounds like you might need a clutch and a few other components maybe. Do a search on F.A.S.T. Racing clutch or feel free to call me 785-364-5325

We have em!!!

Hell no, i never have time to do my own shiat. I will prolly throw a 4mm cub together as i like the way they run out!!

Give me a call . We keep em on hand. I like the 35 air strykers on a strong play port or 33pwks on a woods port!

call me Brian.

Nugshee, give me a call as i keep all that kind of stuff and more on hand!!! 785-364-5325

Yep, each person/bike combo will respond differently to this mod. It is definetly not a 5-10 hp gain as we all would like BUT on some motors it should make it start easier and rev a little snappier/crisper. Might even be able to run a bit richer jetting with this coil. After selling several of these Nologies, i finally got the chance to install one this weekend and it did make it snappier and ran alittle better! Just my .02

Thanks guys!! Glad you got to hook up with JT and see his bike run. It is definetly a runner! Sounds like all had a great time!!!

My handle?? LOL Copy that rubber duck .... cmon 10:4 !!! lol We knew what ya meant Brian. lol jk Balls deep give me a pm if ya need one, We keep that kind of stuff on hand!!!

What size bore/stroke configuration are you looking for? Pm me for details ....

Im interested in coming down. Just hope the rain holds off for you better than our drags up here. YOu do allow slow Raptors to run dont ya? LOL

So Buzz , is there gonna be friday night practice? Damn rain!~

Oh how funny, at the same time. lol

Hi Bill, welcome aboard! Cool concept! You might also consider checking out Planet Sand.com as there are more hard core draggers over there. I think most of the Banshee guys will need more than 4 gears though for 1/8 mi cause they only turn about 10,000 rpm.

Sounds like the end of your shift shaft flipped around on ya!!! Do you need any help or parts ? Pm me!!! Let us know what it is.....

madkaw , that is awesome and a good lookin bike too ! Those 350cc stock cylinder bikes can be real hard to beat for sure. Brent (zeeman on planet sand ) just ran a 3.86 in 300ft. sand on his lil ol F.A.S.T. Racing 350CC that i built for him. ANd he is about a 220 lb rider with no wheelie bar. This is the orange/red (real pretty lookin ) drag bike at LS for the HQ ride! Sometimes makes it hard to wanna change to the Cubs doesnt it?$$ Good job madkaw!

We had the same problem with air strykers. They should idle if you change the needle to maybe a CEL or CGL and might have to play with the pilot too. But they will idle. Pm me if you need needles or help. ALso reded , the adjusters i got ya were longer (not shorter) so you could have full throttle!

Almost sounds like a good overhaul, ported stock cyls with stock crank (with a good strong play port) would do for your riding needs. Give whoever you decide to go with a call and talk with em and tell them what you want and see what they recommend. I know that our trail/play ports are more than enough for most people that are not draggin all the time! If you can afford the added expense , the 4mm would be great for torque/power but i really think just from you have said that a play port stock stroke would fit the bill!!

Hmmm, lets see the cost of 2 sets of Cubs $$$......... jk lol Get your list together and give me a call as you Know I keep all that on hand!!! Yeah this shiat is addictive huh? LOL

Murphy, pm me i have what ya need!

JT, i just finished a 10mm Trex for a guy that wouldnt shift hardly at all (worse than yours by far) and now he says it shifts like butter and better than new! There is hope , just gotta look in there and replace what is worn and do the mods!!!