DMAN94

I HAVE 1 OFF A 94, 20 + shipping. just let me know, i mail asap. thanks

right top view

left top view

r ball joint below, left 1 above

i have both uppers and lower left. they are off a 94', balljoints and boots are good. bushings have been replaced not long ago. $25 each shipped. they are painted black. i have pics i can send you, just leave me your email. thanks dennis

to fill the holes just use a piece od alum. rod (solid) the correct size of the holes and use wire like you would use to hold your grips on. mine have been removed for years. bike ripps, never had a problem.

I HAVE ONE, I'LL GIVE YOU FOR 5 BUCKS, PERSONLY I HAVE MINE BLOCKED OFF. ITS BEEN LIKE THIS FOR THE PAST 7 YEARS AND SHE RIPS. ITS UP TO YOU. ALOT OF PEOPLE THINK YOU NEED IT, BUT YOU DON'T. DENNIS

you will need new shocks & brakelines for the a-arms. you may be able to stretch them but longer ones are the way to go. i just put these on my bike, like them alot.

i have a stock left upper, painted black, ball joint and boot are good, 15.00 plus shipping thanks dennis

i did the same for now. works fine

what type of air filter (setup) are you running. i had problems, only takes 1 grain of sand to make it happen. clean them out top to bottom, it may help.

i haven't had a crossover tube or boostbottle on mine for the 7 years and it is fine. i closed off the holes. she rips. dman

upgraded to dual ss lines. anyone ever have a problem with the bolt goin into the res? i tested each line and had perfect pressure with the stock bolt in with only 1 line. when i put the dual set up bolt in, it will not make the seal. all parts where new. i had so much pressure on the bolt i thought my res. threads where going to give out. i'm waiting to here from the manufacturer today. i was just seeing if anyone else has had this problem. any advice. thanks dennis

i have 1 off a 94' for 5 bucks + shipping. thanks

thanks guys, i will pm him today. as for the stock ones, thanks, but i would like something that wont brake in 2. thanks again

i've been looking at alot of exhaust hangers and clamps. i've been on ebay and other sires. i was woundering if anyone knew of a good deal on them before i purchase a set. thanks

i have 3 from a 94. painted black. 20.00 + shipping. boots & balljoints are good on all 3. have the 4 but the threads are messed up and will need a boot. the balljoint is pressed in. let me know if interested.

SORRY they are sold, i will repost if it falls thru. thanks dennis

thanks, i have paul turner pipes already and love them. as far as trades go i really need the money to to buy a new front end setup. if something changes i'll let you know. thanks dennis

i have a set of works dual rates, set up for mx 160-180 pound rider for stock a-arms. they have no more than 20 hours if that on them. i had covers on them since new. they are in perfect condition. if interested i will send pics. i will post some pics later also. the first 150 gets them, i may include shipping depending on where. thanks dennis

i need need new a-arms. i would perfer +1+2, but will look at all options. not very picky on brands, just want good straight parts, no ones garbage. thanks