BrokeStonedBiker

i though it might be in a little better condition. my jaws bumper looks better than that, but that too has a little dent in it.

hey fixit, this place is right up the street from me. on there web site they sell them but when i called they said they dont sell them. http://www.brocktoncycle.com/catalog_produ...hrottle%20cable i read these are motion pro "control" cables though. wtf is a control cable? there only $8.90 so it cant be the same thing. got any advise for me? thanks

they will send me one for 34. these things only gost about 19. dollars. thats like $15 shipping fee. doesnt make sence to me.

and there solf out till some time in may they said.

i just called vitos and theyt said there is gonna cost 38+change with shipping. thats for cod because i dont have a credit card. definatly gonna get it somewhere else.

where can i get a throttle cable for the aftermarket tors removal system? the stealership didnt have one. anyone know of a good place?

lets see a picture of that front bumper

what kind of frame work you plan on doing to it?

what am i? JU42GGW08XA164357 Im supposed to be a 99 but i was wondering if anyone can tell me different

well that explains why your such an ass moose. i used to a little punk. i aint going to tell you how iv changed but, i can see things more clearly than almost any of you folks when it comes to problems in peoples lives. ALL who sin are slaves. the truth shall set you free.

from what i understand your not suposed to use the rubber rings

LEBanshee gets it. wade boggs, lol. those days are long gone. i used to be a pitcher when i was little and it was a blast till i hit an oppsing player by accident then there pitcher hit me in the head on perpose in summer league. i got tired of being the best on my team and evry one telling me how good i was. it was all lies. and my farther went to only a few games. so i quit.

i rout for boston because there my home team win or loose. but i dont get involved in the game like some of these hard core, nothin to do but drink while while watchiin the game, rising and falling with every pitch,hit,swing, basball fan junkies. i do like baseball, but im not a baseballaholic. hummmmmm

So if your a boston fan f*ck YOU becasue you are all one in the same bitter?

oh i see it now, you want a bigger front sprocket and a smaller rear sprocket. right? that will get you the most out of your gearing speed right?

correct me if im wrong but you said if you go to a 13/39 you will have to shift every 2 seconds? you will have to shift more if your running a 16/41. if i were you i would run a 12/39, if you can start in second fine with a 14/40 then i would try that out and see if it works out. the lower your gearing sprockets are the more speed you will get out of each gear before you shift. why on earth would you want to run a 16/41. with 80 hp that would be like burn out city. get some 22's and a 13/39 and see if thats what your lookin for. im right arnt i? i havent got this backwards

yeah i hate new york. bunch of fuckin asshole, callin out sox fans like there all the same. though new york is and has been the best team for quite a few years now, it must get old ruiting for them every year seeings how they always seem to win. too pridefull. your not even apart of the team so i dont know what your all excited about. the red sox isnt a bad team. but you knows sad? the Rangers. lol

ii skipped a lot of the posts, but i would definatly go with about 13/40 13/39 gearing. thats too much HP for anything more. less teeth on that engine would be much better. its kinda obvous aint it?

nice close ups. lol im interested in that tail light. got a far away picture of that?

yeah go in the paint section and ask them. i walked in the lawn and garden section and asked someone and they looked at me like i was crazy and asked what i want it for, and then said i dont think we do but you can check with the paint department. fartknockers.

Lowes has HCl?????? Where??? I use it from time to time in an acid etching pen for marking materials. You can't just look at 1045 and know its 1045. well i actually went there for some meriatic acid, seeings how i couldnt find any HCI anywhere. walk over to the paint section ask the dude if he has any meriatic acid, yeah its right around the corner. walk over walk right into the poision sign. and there it was they had cases of it i was gonna get some but im just gonna look to see if i cant find a chroming place first to take this fuckin chrome off. whats 1040 and know its 1040? does 1040 have anything to do with HCI?

yes there is suposed to be a idel screw on both sides. but if only one is missing only one side should be reving high or not at all. defiatly get that taken care of first

you lost me on the giving up the sake of machanical advantages and safty? im a simple person of few words but that didnt make sence to me. yeah i would have rather cut the hex into it but didnt know the size and just decided drilling it would be easier. i dont own 2 crescent wrenches big enough for the job. so there would go another $35 to sears. is it not a good idea to use this wway you mean? like tightening it too much or not enough. could be a risk to your safty. was that what you ment?

that should teach you not to bring it to a shop. this must be a joke now that i thnk about it. what did shee go in for? dont say a tune up. pllllllllleeeeeeeeeaaaaaaseeeeeee. dont LOL

i have a helmet im looking to get rid of. if anyones interested make an offer NO offer will be refused the visor has a crack but the helmet does not, just missing some paint.