Jump to content

lucky13

Members
 View Profile  See their activity

  • Posts

    130

  • Joined

  • Last visited

 Content Type 

Everything posted by lucky13

  1. lucky13
    1999 no tors stock thumb throttle with aftermarket cable idle kit aftermarket air box lid bogs 20% revs 80%
  2. lucky13
    sounds like a deadbeat to me
  3. lucky13
    long rod port cylinders head mod for a reasonable price
  4. lucky13
    the bolt fell out of my shift star twice you might want to check that you can see it by just pulling the clutch cover off
  5. lucky13

    Shocks

    lucky13 replied to Yama_Freak's topic in Wanted

    i got astock pair with white springs off my 99
  6. lucky13
    i got that lid its a lot of money for a cheezy piece of plastic next time i would proably just modify the stock lid
  7. lucky13
    seems a little priecy to me
  8. lucky13
    GIVE BANCHETTA A SHOUT HE'S DONE IT
  9. lucky13
    I WOULD STICK WITH THE PRO DESIGN IF YOU RIDE IN ANY WATER OR MUD
  10. lucky13
    WHAT IS YOUR JETTING HOW ABOUT COMPRESSION BEFORD IT LET GO
  11. lucky13
    IT WILL LOOK LIKE A MONKEY F**UCKING A FOOTBALL
  12. lucky13
    WHAT DO YOU CONSIDER THE WORKS
  13. lucky13
    I HAVE RAN BOTH THE BOYSSENS PEDALS AND THE V-FORCE SYSTEM I CURRENTLY RUN THE V-FORCE ALTHOUGH I DID USE THE BOYSSEN PEDALS THE OTHER DAY TO SCRAPE THE GASKET OFF OF MY CLUTCH COVER AND THEY DIDNT WORK TOO BAD SO YOUR CHOICE BUT YOU KNOW MINE
  14. lucky13
    I PIAD LIKE $13 FROM THE STEALERSHIP AFTER I LOOKED FOR AFTERMARKET ONES FOR LIKE 2 WEEKS AND HAD NO LUCK AND THEY HAD THEM IN STOCK
  15. lucky13
    HOW DO YOU LIKE YOUR DYNO PORT PIPES
  16. lucky13
    I HATE TO SAY IT BUT IF HE IS A GOOD RIDER YOU BETTER CROSS YOUR FINGERS
  17. lucky13
    TRY A MONKEY WRENCH AND A LITTLE HEAT
  18. lucky13
    I THINK THEY WOULD BE KINDA SHORT YOUR FRONT END WILL SIT LOW UNLESS YOU HAVE 18'S IN THE REAR BUT STILL FOR TRAIL RIDING YOU WILL BE BOTTOMING OUT EVERY WHERE
  19. lucky13
    ATF
  20. lucky13
    I HAD THE SAME BAD EXPIERENCE WITH SYNTHTIC OIL. NOW I RUN ATF
  21. lucky13
    IS THE T.O.R.S STILL HOOKED UP
  22. lucky13
    thanks for the information. I am going to have my 22cc domes made into stroker domes.
  23. lucky13
    I HAVE A+4MM LR STROKER MOTOR. THE CYLINDERS ARE IN THE STOCK LOCATION. I HAVE A SPACER PLATE BETWEEN THE CYLINDERS AND HEAD. I AM GOING TO PURCHACE A AFTERMARKET HEAD WITH O-RINGS. INSTEAD OF A GASKET,WILL THIS HEAD WORK ON TOP OF THE SPACER PLATE THANKS

BHQ Quick Links

×
×
  • Create New...