wansomordis

If your are looking for one that won't rust /peel/or dull then trinity stainless pipes are the way to go..Also no pipe clamps to buy.. Trinity's customer service blows.........

Why not get the shift star machined ?? I've heard there are a few on here that can do it or send it somewhere like duncan racing (25.00) .. It takes pressure off the detent spring which helps shifting from gear to gear..Also helps finding neutral when you are using heay duty clutch springs.. Just a thought

I ran moose juice for awhile then switched to Engine Ice and It runs cooler. I think 15.00 for a half gallon is a little high but have never had to top coolant bottle off yet..A++

I'll sell you one with a tire ( maybe a plug or 2 ) off a 2000 not bent or too scratched up 60.00 includes shipping Need a pic send me a PM

Hey Before you remove the carbs again and again just do this first.. Take the left carb cap off (as your sitting on it ) and see if the top of the slide has 2 notches in it.... The right carb will ONLY have one notch.. Bike will not idel on both cylinders but when you get on it it will come to life.......This is a done all the time..

Cascade sells a set of fender braces for 18.50 The only downfall is with alot of mud they will slitley bend (very little) when you wash quad just push up on them. Mine have been on for 2 years and work great.No more fender flap or sag.....

Well I have Trinity Stage IV pipes and wouldn't trade for nothing. Stainless is the way to go,plus you don't need to spend another $70 bucks on pipe clamps. About the jetting I used to run 280 mains with stock carbs +4 timing and 17cc domes K&N with lid removed and thats the same toomey calls for.. And if low end is what your needing than get the flywheel machined..

About the chain lube if you have an O-ring chain and don't like all the gunk and oil all over the plastic then why not just use ARMORALL .. Think im joking ?? On an O-ring chain all you need to do is keep the O-rings from drying out that it. now for non I'd use some kinda oil based lube.I run 175 dollar renthal X ring chain and sprockets and still last bout a year. If you can get a year out of a set chain and sprockets than your doing good (racing)..

Well for one thing V-force reeds are for mid to high rev not going to help out much on the bottom...If your looking for low to mid (what most banshees need) than pyramid reeds from DR Racing..