raxen

full bore and house of kolors, you just can't go wrong.

Nitrous.

Damn that's a nice one. I would buy it if I didn't already have five different swingarms laying around the house with another one on the way from MP racing. It sure is nice though. You never can really have too many swingarms can you?

I've got a spare set of spindles.

You could sell some nitrous for the shees. A new and upcoming nitrous company that is looking for dealers is cold fusion n20. Cold Fusion.

Is that a cut in half office trash can mounted on the roof?

They are going to hold in on trial in Iraq for something he did to the people of Iraq. Whatever that could of been? I bet someone kills him before he hits trial there so no execution will be necessary.

LRD adjustable pipes. I helped a friend put some on his shee and their idea of "fits stock brackets" is a die grinder and some duct tape. The pipes need a caulking gun with a tube of silicon seal to adjust them, then they leak two days or so later. You would be better off sending me your money than to purchase LRD adj. pipes.

Contact dlnoss. He manufactures nice parts. Heads and little billet trinkets. Contact MRMOONEY. Swingarms, front ends, etc.

It is nice. That is how a shee should look.

I'll get in touch with you.

Do you do some good fab work or know someone in the field you can recommend?

Rolla for now finishing up some degree work at UMR.

Yeah man, it has been fun here. I like a good argument whether it is over something or not. I don't know maybe I needed to vent my TITHEAD steam elsewhere and you were the last poster that I saw. I have an anger problem. Oh yeah, I can read but most of the time just what I want to see. I have two BS degrees and am working on a masters currently. So, no one thinks that I am illiterate. I thought the tire size you used in the calculator were 21's and not 22's. I get something like 88 mph with 21's. Well, it has been fun.

Ahh, what the hell. It must be the Christmas season or the fact that I am getting ready to cut some more unecessary stuff off of the shee frame but I feel great. Nightrider, I am sorry for whatever I did to make you emotional. Next time I run that way to visit the parents maybe we can have a more friendly meeting and race.

In that case, I agree with you on 90 mph is achievable but I do not believe in over that was all I was implying. Back in the beginning You said that 90+ was achievable ans I was saying bullshit show me the proof of a shee with those mods do it. This all branched out of you saying a shee with those modds could do 90+, which is bullshit. You made the attack The Hayabushee is real, wait a little bit and I will take running it.

that's right.

I've raced at Kanawha Valley Dragway a little ways from you. Its an 1/8. I have raced at three strip in Missouri off and on before I broke the bike down for a heart transplant. I never claimed to be an expert and I currently don't race top fuel like you, Mr. John Force. I am getting into drag racing more each day and too many people blow shit out their mouth about how fast their shee goes but no one provides proof. I'll admit I am not the best, my old shee wouldn't 90+ mph, and my new shee will. There wasn't anything that you said that made me look bad. You've probably got some of your video somewhere of you doing a 1/4 at over 90 mph somewhere. All I am saying is proof it. A pro dragger like you probably has timeslips laying everywhere. Just scan one, put it on imagestation, link it, and post. You have danced around it now for 4 posts, just do it, and I will shut up. Everybody has to talk shit about how fast their shee goes but no one will back it up. You are acting more and more like tithead, talking shit but no proof. Just post the slip and I will gladly shutup.

NYUK, the vidoes keep getting better. As far as the page that you can figure out the top speed of the shee, it was given by some Banshee dragers off of ATV Drag Association. Take it up with them. If you want to think your chrome boost bottle and freeway flyer gears will go 90+ mph then go ahead. Just post some proof and I'll believe you. I doubt he is turning over more than 9 grand rpm on that motor with stock pipes. Go talk to the people on ATV drag, they made the damn thing. Tell them your problems with it. I could have believed 90 but you put the 90+ on there and that is where you get into the TITHEAD region of top gun banshee pilot. Let's see some proof of 90+ mph and I will stop thinking frocashmoney24's lawnmower will rip you a new asshole.

It might. You can always go bigger than that.

Anything about rear tire size in there. The calculator is pretty accurate. Show me some proof of 90+ mph with reed spacers, boost bottle, and stock front fenders. You can scan some timeslips, put a video up or something like that. Somehow, I think it would take a solid core rocket to do 90+ mph with the limited motor ability that would have.

What was the margin of error on that radar gun, Klotz? +/-20mph? It doesn't look like your modds listed where get you 93 mph. See for yourself. It is pretty close.

I have several times. He is very good to deal with and quite reputatble on Ebay. He takes awhile to leave feedback, about two weeks or so after the auction. Sounds like you should have asked for more pics and questioned him more beofre bidding. Be aware of ebay, ask for pics and several questions.

Cheeetah is the way to go, nikasil plating inside so you gain about extra 2 HP from beating out some frictional losses. What type of HP range are you looking for out of an engine?

Who powders a frame for 250, give me a number? Are they any good? That is pretty cheap.