camatv

ttt anyone want to see pics of the DENTONS?

yep he's goping to pick them up on sunday then we're getting some plastic!@

what about a cr500 conversion?

SOLD pending payment

this cylinder did 96hp on gas on Nmotions dyno. with 39pwk's, and shearer big bore pipes stock ignition..

300 plastics only or 350 with seat?

yep all bolts spacers washers end caps i think i MIGHT even have a set of bolts for the frame mounts.. i will dig everything out and take a pic of it all including hardware. the dentons i will sell for 500.00 no less just put a full set of ball joints in them. they use warrior ball joints from an 87.., if you have a dunner drag bike but dont want a superlight front end the dentons i have are sweet..

quick pic here. i'll take more i will also have a set of denton +2 FORWARD stock width j-arms but they will be more than these. they are very rare. woods, dune set up.

set of complete drag lite j-arm for banshee uses stock stuff and uses stock spindles or spindle mounts. . good shape was going to use them on my j-arm frame but just bought ball joints for the dentons that were on it and now have another frame all together. 350.00 for them..

340 without seat?

tired off looking at it waste away someone needs to smoke some body!! will sell it with polished head with interchangeable domes now. head is PERFECT and polishd to match polished cylinder 800.00 head is worth 300 alone reeds are worth 200.00 alone.. so your getting everything else for 300 bucks!!! if you need an idividual part i will part it out now... its gotta go

bg's products work great the sea foam is ok to use in diesels when i change the ole fuel filters on fords i fill them up wth sea foam. then they start easier.. if the vehicle you ran the cleaner through ran good with it but then went right back to the prolems its got some major isues that "majic" ceaner wont fix. probably stuck injector or a fuel leak iternal to the intake also the good ole plugs, andfilters can cause these isus as well. there is NO "tune up" in a can ...

400 with out grill complete. with seat.

i am redoing one right now they will ( HOPEFULLY) be on it

hehe yea we need to work on yor ridig skillz. hoefully youwill be down fo thanks gving. we'll have to hook up..

i did but its seems noone wants them if they were cpi's id sell them in a second.. its just funny that these would out pull cpi's but for what ever reason nob wants them if i still have them when you go agin we can throw them on. see if it helps your topp end.. heck sell those cpi;s and just buy these!

MO3

MORE

new 4 u picola's

will sell without seat and i am oppen to offers. NO TRADES PLEASE

where are you located?

oh its a single carb set up.. can you tell me the slide number? its on the bottom of the slide. 2 digit number.. i have one off of a cr500 and might need a set to convert to alky sometime soon.. unless you want this one i have?

pro circuits and some port work and head work can lessen the "pipe hit" by quite a bit...

i doubt that anyone is going to give you a 7,000 dolla rappy for that.. you might be better off selling it or parting it out and using the money's to buy one..?

i am going to clean them up and take some more pics.. they have NO pants burnin from legs on back side of pipes. they are a LOT cleaner than they look...