camatv

i will send pics of my 450 its pretty interesting .. so i would need 250r front hubs, calipers, and caliper mounts, and 250r rear caliper and mount what about the rear brake master? would i need 250r master? i have a complete banshee that i am going to part and was hoping to be able to use all that but its no big deal.. just want to know if i do buy it what all i would need... i have bought a few custom frames and have had a lot of surprises...

i now have a set of 19 cc domes for the head i;d throw them in for 45.00 extra.

trx w mx set up?

replied!

got pics looks good. i have been wanting another mx type bike and have a trx 450 that built. but am not really really happy with it. does this chassis take all the stock parts tank, plastics, brakes radiator? it looks like it does and most lsr stuff usually accepts all stock stuf., what front shocks will it need? isent you an offer adn if you want to pm me if i am too far off let me know? and where are you located? i can get a decent ship price through yellow freight also.

pro design head will come with studs now.. 150 shipped

pics to me at: [email protected] and i take it you are wanting 3500?

i WILL be parting out a complete roller stocker frame it has a very nice set of plastics/ seat on it uncut fronts they are red and yellow and have a decal set on them and the seat is covered to match.. great a-arm frame and full roller stock componets NO rear axle.. rear hubs, or sproket, brake hub.. sand skate 2's 10" wheels. 120.00 front sand ribbed tires on wheels 100.00 stock all gold full set of wheels and front tires.. 85.00 KC headlights and a HUGE stator 120.00 BUT it had a screw come out and damage the pulse coil. very very cheap and easy to fix. it still actually ran!. prodesign head w 21cc domes NEW o-rings.. 150.00 front complete plastics With complete seat and stainless grill 300. all other parts please send PM with offer and please no 5.00 for the frame and you pay shipping BS. stock carbs with TORRS removed and idle kits in them jetted for t-5's PERFECT has Toomy jet kit in them also.. with throttle cable. 120.00 i will get pics tomorrow this will ALL be listed on ebay in the next week also.. going to clean out the garage will have a ton of auctions and stock, drag parts to clean out..

not right now.. i am going to put the motor in the dunner/ drag chassis i WILL be parting out the complete roller stocker frame it has a very nice set of plastics/ seat on it uncut fronts they are red and yellow and have a decal set on them and the seat is covered to match.. great a-arm frame and full roller stock componets NO rear axle.. rear hubs, or sproket, brake.. sand skate 2's 10" wheels. 120.00 front sand ribbed tires on wheels 100.00 stock all gold full set of wheels and front tires.. 85.00 KC headlights and a HUGE stator 120.00 BUT it had a screw come out and damage the pulse coil. very very cheap and easy to fix. it still actually ran!. prodesign head w 21cc domes NEW o-rings.. 150.00 front complete plastics With complete seat and stainless grill 300. all other parts please send PM with offer and please no 5.00 for the frame and you pay shipping BS. stock carbs with TORRS removed and idle kits in them jetted for t-5's PERFECT has Toomy jet kit in them also.. with throttle cable. 120.00

i have a banshee to sell, stock frame, arm's, axle, nmotion ported motor, new wiseco crank, new pistons, bore 65.25mm bore, stock carbs stock airbox, k/n filter in box, t-5's pro design head 21cc domes, new gaskets new seals, motor being built now,. will have pictures soon will have new kenda klaw fronts, and kenda klaw rear tire's alluminum wheels, full uncut plastics grafix kit with seat cover. red/ yellow plastics. located in hutchinson kansas.. i CAN put this motor in my roller drag frame if wanted.. would sell that frame and this motor for 4500 OR this set up for 3200. the drag frame will have 34mm pj's OR alky 38mm lectrons, +6 swingarm. +2 forward j-arms, lighten'd stock frame.. i want an LTR 450 stock bike.

hehe hey money in hand!! ( didnt you know it takes at least 1 -3 years to sell stuff that makes you faster!)

got a set of inframe stamped small bore CPI pipes to sell these need to go quick. 350 + actual shipping located in hutchinson kansas.. these are for a friend you know what they look like in good shape..

oh i love it. used parts that are junk.. seen it heard it bought it.. its USED i try and acurately sell my extras but sometimes get bashed for being honest.. then if i putin a vague descriptin and say "like new" used for 8 years.. and then its oooo i want it ooo i want it.. you have to be carefull of what you are buying and rember that its used. it SUCKS to get ripped off and i hate it whenit happens to me if there is a problem just tell me what it is so i can plan to FIX it.. no lie to me on stuff and say it works great.. that sucks on the motor.. and NO i didnt sell this guy anything..

325 shipped.

part out ?!

wow....

i hate to say it but sell the banshee... i would personally rather race a mx'd 400ex than a banshee they are heavy they push hard in corners and the powerband is hard enough that it is hard to hook in corners. you should go to a few races and watch them and see if you still want to mx the banshee.. mx racing is a lot of fun you will either hate it or love it take your time and dont over do the first few races use practice days to your advantage and dont expect to go out your first time and whoop everyones arse.. i race banshee's for a few years over my 5 year stint at mx racing. there are a lot of things you can do to them to make them competitive. BUT a 4 poke is a much better mx bike.. they have a much smoother powerdelivery and are generally lighter that means less arm pump ( cramps) and less work to turn, and exit corners.. now if your going to drag race... haha hehe!

man thats going to be GREAT> arent you glad you listened to me onthe motor!.. and just think this one hits harder than the lil ole cub.. now you just need that 12 over arm.. hehe

thanks james think that lil cub will hit over 105?

1800 complete thats new pistons, replated, ALL new gaskets, seals, case machining for the cylinder to fit, the case filling so it seals corectly, case matching for the transfer tunnels, dissasembly and reasembly new reeds on the cage that needs it, studs that it needs, and new intakes that you will need also motor will be turn key.. crank must be welded w TZ bearing and i would recomend an ez shift trans motor will make a LOT of power and be a fun dune bike what size carbs and what pipes are you going to use? if crank needs welded and you need a tz bearing for it i can do that also.. if you like call me 620 802 8807

might include axle now..

hey just to let you know buyer didnt show up for mine this weekend if you still want mine i have them.??

350 shipped on drag arms

pic of head. may have a buyer for just the head if it sell will lower price on cylinder..

300 complete w seat, grill +shipp?