apbt549

here are some pics..........

will email them to you tonite....

nobody wants to make an offer......

i live in fort myers sold them ended the auction early sold them for 400.00 shipped

i would have to say the best mid range pipe out there is paul turner mids..almost any pipe you get you will have to re-jet the bike..... if you want i have a set of used paul turner pipes for sale in the for sale forum.....

pipes are ebay.........

your right my bad it just came out wrong

do you know if the bike is to lean or to rich if its to lean it will run like shit and get hot are the plugs brown like a choclate color ......if the plugs are getting fouled out then i would say you are to rich.i don't care what any pipe maker says they will not get you right on with the jetting they might get you close but you still will have to play with it...i maybe worng but if its fouling plugs you might want to lean out the needle maybe move the clip down one notch this will raise the needle allowing more air to get in maybe that will take care if you are fouling plugs.....i maybe wrong try it and see if it runs better its going to be trial and error....or maybe go down in the main size.......good luck when i installed paul turner mids on my bike duncan racing and everybody on here said to go with 280-290 mains thats all i should need but i had to go up to 320's to get the thing to run right........good luck

i will send pic today.....i live in south florida

damn nobody wants these for 125.00

that what i was think some where in the line of 350.00-375.00 shipped let me think about it.if you want give me your email addy and i will send you some pics.......

have a set of show chrome paul turner mid range pipes with silencers .the chrome on these pipes are great look like brand new.the pipes have some scuffs here and there and one pipe has alittle dent in it but you can't see it after you intall them.these things sell for 700.00 plus shipping.take 420.00 shipped .can take pics let me know if you need them........

I have a pair of toomey t-5 pipes and silencers.the sliencers and stinger pipe are brand new got them back in april 20 06 from toomey maybe ran 1/2 tank of gas thru them and the pipes are in good shape have some knicks and dings here and there but are over all in good shape chrome looks good.comes with a set of billet exhaust clamps brand new clamps.....still in the pack.....make me an offer and save they i'll give you 100.00 for them b/c thats not going to happen......i paid almost 200.00 for the silencers and stinger from toomey

pair of 34mm mikuni flat slide carbs with thrumb throttle cable. work good just to big for my bike .one has alittle chip missing out where the air filter boot go .the boots will cove it up with no problem..125.00 shipped i can email you a pic of the chip i don't think it will hurt the carbs at all......

he might be talking about porting out the reed cage on the v-3's.if you want i have a brand new set in the box still i will sell for 200.00 shipped..or you could just mod the stock cage and change reeds........

don't know on the jet size but if you set your timing at +4 and go with a 20cc or smaller dome you will have to run race gas depending on your ele. .i know when i instaleed a cool head with 21cc domes i didn't have to change the jetting it was fine.so i don't really se why you would have to change the jetting with a cool head and a timing adjustment .the only reason you should have to change your jetting is if you open up your intake or your exhaust allowing your motor to breath more.......

i seen some on ebay also don't know if it was that guy or not.also might call carbparts i am sure if they don't have one which i would think they do they can get one for you......

all i am trying to do is get my money back out of these and i will pay the ups charge... i will seperate them i want carbs and k&n clamp ons both are brand new 370.00 shipped v-force 3's 200.00 shipped still in box intake is used and has been machined to bolt up to v-3's 50.00 the hose that hook up to the carbs are in great shape.50.00 shipped

i got a brand new set of 33mm keihins and some k&n clamp on with blk outter wears that are brand new but they have been installed on my banshee didn't even run a tank of gas thru them to big.along with some v-3 reeds that are brand new in the box i would rather sell it all as a set but if i can't i will seperate them .the intake is used and i had to machine the back to get it to fit the v-3'sthats the only thing that has some hrs on it everything else is brand new.i got the carbs and clamp on's from jeff at fast.the intake looks like a pro design intake with the boost bottle on top.i will take 600.00 for everything shipped.if a few days go by or by the weekend nobody wants this all i will seperate them..... i will have pics to email out on tuesday let me know if you want pics please don't waste my time emailing you pics if you are not looking to buy ...eveyrbodyu knows what the keihin 33mm carbs look like and the k&n clamp on filters with blk outwears but i will take pics to show you they are brand new.........

tks guys

nobody i will drop the price to 80.00 shipped i paid 85.00 plus shipping if nobody wants them i will send them back and take a lincking on a re-stocking fee

does anybody know where to get a jet holder .something ican put all of my keihin jets in so they are not all over the garage i see sudco has something but its has jets already in it......anybody

i have a set of k&n clamp on filters with blk outter wears brand new still in box they are for 28mm carbs. brand new still in box and still in the bag and so are the out wears .85.00 shipped

i got some t-5's that are in good shape with new stingers and slincers.how much are you looking to spend?

i got mine from jeff at fast toys