apbt549

good stuff to clean the chrome up on pipes

why do you say that? jeff is the man good customer service to bad he's so busy his place needs about 3 more of him.i won't go any where else from now on .tks jeff

i have some siniclers that need to be repacked with stinger pipe

there is a big difference between snap on and craftsmans..craftsmans is okay but if you make your living with your tools you will buy snap on b/c when you need it its there....... this is no lie i used a 7/8 snap on wrench on a bolt with a 5ft pipe on the end of it to break some bolts loose i used the snap on wrench to do about 10 bolts well the craftmans guy of the shop said give my craftsmans wrench a try used the same pipe and bent his wrench in half then took the snap-on wrench and broke the bolt loose.....are snap -on stuff over priced maybe but they are good tools......

there was a company that i seen somebody talk about on here that has a bolt kit it was under 150.00..if i had it all to do over again i just got done stripping my bike to the frame i would buy that bolt instead of getting all the bolts from the dealer...... alloyboltz.com

yeah it sounds like you weren't #1 in her life anyway you will be better off with out her good luck and watch your back the knife is still in her hands and she might not be done with it yet

very true meat .trust me you need to be very smart here protect your self know .i had a firend of mine who went thru this and he wasn't going to get a lawyer i said what go get one dumb ass b/c you know she has one and she will walk away wih everything ......bro do the smart thing here protect yourself and some of the things you have worked for......good luck

i know the guy is freaking nuts i got it back and like a week later he comes to my house and tries to steal agin from my house this time .....like at 8am get a phone call from my wife scarred as hell saying theres a trk driving around the block .she called the cops they came and chased them on my way home i seen him and chased him dumb f**ker.....i hope when he gets out he comes by this time when i am home so i can un-load on him oh yeah forgot to say i own and raise pit bulls i have 8 here right now maybe i will turn one of them loose on his ass........

yeah i found out who took it its nice to have friends in LE the guys in jail but not for taking my bike but for other shit the f**ker came to my house and tried to take it back after i got it back and scared my wife he's lucky i wasn't home i would of fired him up......... i still need to put the plastic on it and jet the carbs and shes ready to roll.i was heart broken when he took it man talk about a bad day.........i was ready to kill somene the day i found it the guy wreaked it on MLK B-DAY AND PUSHED IT BEHIND some ones house and my biddie seen it and called me and i called my buddies in LE and the rest is history.........revage is a sweeet thing i will wait until he gets out

Will do its a 03 LE the yellow and blk one

well today was my first ride on my banshee almost 3months .since it got stolen in the begining of jan. got it back 2wks later and had to fix it back up bent the rear axle both left rims and cut the plastic ..took the thing down to the frame had it powder coated and did some work to the motor and she is ready to run man it felt great to be back on it again...the plastic is not on it yet but it felt good man she screams now did some more mods to it while i had it apart i had to

you paid somebody to install them for you..you could have done it yourself

tks guys i didn't think it would hurt but want to make sure

anybody

Will it hurt anything if i modify my pro design intake so i can use the v-force 3 reeds.it has a square male peice on the back i grind or mill off b/c the v-force reeds have a round hole in them.that shouldn't hurt anything should it b/c the gasket is on the out side of this square piece .....the gasket will still seal it off with no problem it looks like.has anybody else done this? problem is male square will not fit into round hole.....

i did a search on here a few days ago and it seems that everybody liked v3's

i have a brand new air box off of a 2006 banshee it is in perfect shape was pulled off the bike before it had any hrs on it .it is a complete air box with the lid and factory filter and boots and clamps .i will take 40.00 for everything and i will pay for ground ups.....pm me or email me at [email protected]

i will ask jeff i pm'ed him about them ..i got some carbs from him he's a great guy i will ask him if he has them and how much .i have some t-5's on there but haven't used them yet someone stole my bike and put those t-5's on there and then wreacked it.i am just about done putting it back together might throw some v forces on there with some cpi's .tks loco

where is the best place to buy (cheapest)to buy some cpi pipes?

do you have the stock air box still? what size are the bead locks and what size are the tires who makes the rims how much for the paul turner pipes .what kind f shape are they in?

i was wondering about that i got my shee stolen and got it back 4wks later but the vin# is gone how do i get another one?

i live in southwest florida.......... i am with you wallace its hard top find them if and when i do i will be all over them..........last person seen on it was a blk male with dread locks......

guys keep an eye on your banshees they will and are stolen when you think they are safe...mine was taken out of the back of my truck while i was at work i iparked in a high traffic area and was parked right out frt of where i work.my truck was parked maybe 15yards in frt of my building..they cut the starps and pushed it down the road and cranked it up and drove it off...and do yourself a favor go get insurance on your bikes..i didn't have any insurance and now it looks like i might be out like 7-8k.unless the companys insurance will cover it......it was a yellow and blk 2003 limited editon i miss it already its only been 4days so maybe the cops will find it..i found out it was gone like 20 mins after they took it...

pretty much drag racing on some hard packed dirt...don't really know the distance. i don't have a problem with the stock tires hooking they hook up pretty damn hard hard enough the frt end comes up in 1st 2nd and 3rd ...to me thats my biggest problem until i keep that down i don't think new mods will help much do you?

I need some new mods i want to smoke another shee. what should i do next my bike is pretty fast but i have trouble keeping it on all four tires it likes to come up in the frt end.right now it has the following mods....its a 03 limited shee with pt mids with fat boys no air box lid , k&n filter and 320 jets. now the reason for the new mods are a friend of mine has a 04 shee with pipes fmf and a k&n and tires and he changed his back sprocket went up by 2 teeth.i am tired of him bugging me to race so i want to smoke him bad so he will leave me alone. not wanting to change the motor b/c it doesn't have that many hrs on it was thinking of maybe some reeds and a 4 degree key will those mods make that big of a difference or what elese is there where i won't mess up the motor i don't want to make mods to the motor and then have to work on the motor every other month b/c of the mods. know what i mean.give me some input here guys......tks karl