sredish

Correct me if I'm wrong, but the idea of the torsion bar is to put up-down tension on your front wheels, and still allow them to flex up and down at a certain rate so it'll ride good. If you crank your torsion bars up to the max, then it'll stiffen the hell out of your front end and cause it to become rigid and bouncy, and not perform very well off road. I'm unsure of the total amount of gain, but it usually isn't more than what it'd take to level a vehicle either. But what do I know, I didn't even click the link....

no and yes. they have the reinforcement rings, but they will make the front end 1 inch narrower, not wider. These are often used in cross country with wider a-arms. Scott

I have a pair of front ITP Baja 10x5 wheels with a 4-1 offset that will fit Banshees, YFZ's and such. These were bought, mounted with my Razr2's and then bolted onto my Banshee to measure width and that's it. Never ran. These cost $92 a piece, new. I'll sell for $160 shipped unmounted, or $225 with the Razr2's at 80%. Thanks, Scott

I have a pair of 4-1 offset 10x5 ITP Baja reinforced fronts for sale. I just bought them, mounted my Razr2's on them and then decided to sell the banshee. They've never been used on the quad. They were bolted up to check width and that's it. They cost $92 new. I'll ship them (not to Canada) for $160. Scott

still for sale.....

Racers often do it so they can see exactly where the tires are at. I did it partly for looks but afterwards, I realized how much easier it was to fly through tighter trails or XC courses. Just do it and quit worrying about it...

I'll sell you the fronts off this bike. They've been used for a total of 2 hours. I'm now selling bike and am parting out the aftmkt stuff. I'll ship rims only for $225. Scott

10x5 Douglas Ultimate Billet Beadlocks. These rims will set the quad one inch wider on each side of the quad. 2-3 offset. They have only been used for one ride, period. Brand spanking freaking new. I have dismounted my Razr2's and will be selling the rims by themself. You can see them in the pic below. These sell for $150 a piece new PLUS shipping. I'll ship them both to the new owner for $250.

The quad is not being parted out to the frame. I'm just selling odd items to get back some of my money then it will be gone in stock form. I'll put an updated list together pretty soon. Scott

I'll send them to you, if you'll send me yours in return. no charge. As of now: Nerfs-sold Seat cover-sold Swingarm-sold Hopefully, none of that changes. No rear tires to sell, and no bumpers to sell. Scott

Elka shocks sold. Clutch cover sold. Come on peeps. No sleepy sleepy....

I have a trick -1 swinger with a round carrier and a Pivot Works install kit (worth $50) I'll sell for $300 shipped. I've never installed it, never been used, just recently PC'ed silver. I'll see if I can find a pic.

you hav e a pm sir.

Dyna Ignition (slightly used) $225 shipped IMS "race" pegs (new, haven't even gotten them yet) $180 shipped Lonestar billet rear hubs (no pinch bolt, used 2 hrs) $150 shipped DG Nerf bars (good condition, but used) $50 shipped Lonestar +2/+1 chrome a-arms (very good condition) $500 shipped includes HD heim tie rods and reamed spindles Elka dual-rate piggyback shocks $700 shipped (extremely good condition, includes 3 sets of springs for dialing in) Seat cover (all white woven sides with blue gripper top, gorgeous) $50 shipped Cascade billet stator cover (very good condition) $175 shipped (3-piece design, retails for $300) K&K clutch cover - quick change $200 shipped (freshly pc'ed silver with polished cover - K&K logo milled onto cover) -1 custom flame swingarm w/ Dune Devil's carrier and install kit $350 shipped (never used, freshly pc'ed silver and carrier is new in box. New Pivot works install kit) I can get pics on these things. The swinger is ready to pick up at the pc'er.

I have some rear Lonestar Micro-lite hubs for sale. They are in perfect condition and have been used for maybe 2 hours. I don't have the actual pic at this moment, but below is one. NOTE: The hubs for sale DO NOT have a pinch bolt. The older style have a pinch bolt and they come loose, the ones I'm selling DO NOT have this pinch bolt, so they do not come loose. I'll sell for $150 shipped. Scott

I'll build you a trailer like that for $4,500. It's made from a space-age material called tricantinum. It's found on Mars, but I have a special supplier. It's so light, it almost floats, even with the quad on it.

I have a 3 piece stator cover from Cascade for sale. This thing is in good condition. I put a pic below. I have sinced polished it some and it's shinier now than it is there, but it is really nice and allows quick access to the sprocket. This thing retails for $300 plus shipping. I want $175 shipped for it. I can have it gone tomorrow. Scott

They must not like Tx boys..... I tried making a new name and signing back in, wouldn't let me. I might get on from another computer, but no biggie. I didn't visit that place much anyways... If I find out, I'll ley you all know.

so do you.

I sent a WTF email to the webmaster and haven't heard back. No biggie on the YFZ owner, but it's in the classifieds, you might look and see if anyone replied, and there were other quads for sale in there, so.... whatever.

Dammit, I was banned from Planetsand. I posted my quad for sale, then the next day I replied to somone who wanted to trade their YFZ, then I was banned. So, now I'm banned from Bluefags and Planetsand. Let's see how many more I can get.

Come on peeps. Dyna FS Programmable igntion. PM me for more info. I need this thing to move. Late.

Hey guys, I have a slightly used Dyna FS programmable ignition for sale. It hasn't been on my bike very long at all. I want $225 shipped for it. I have a brand new mounting bracket for it. If you want some pics, I'll get some, but they all look the same. Scott [email protected]