Shee_Rookie

Reasoning With a Bible Thumper by Rod Smith

I agree with above also. Don't have to worry about him f'en you over. Only thing is he should of cleaned some of the mud off the bottom of the nerfs and probably could have saved on shipping costs!! Great EBAYer John

Right on! I ran it this weekend 40:1 mix and seemed great, smells real good too. Maybe it was just me, but I think I was faster.. On the back it says you can run it anywhere from 16:1 to 100:1 WTF kinda range is that? L8

Hey, Was thinking of switching pre-mix to Redline. Been using yamalube 32:1 and the back of my pipes are kinda gunked up. Are any of you guys using Redline? If so what ratio are you mixing at? I was thinking of going 40:1, let me know.. Thanks

Sent you a PM

Anybody have some decent or new stock silencers that they want to get rid of? I crushed the hell out of the right side on mine. Let me know Thanks

Eric, Check your paypal, it's there..

Thanks for the info, I think I am going home early today (cough, cough) to get this little prob fixed.

How do you sync your carbs? and could that be the reason for it bogging down at low r's??

How do you sinc them back ??

O.k. Back to the dreded TORS questions. I was f'en around with the screws on the top of the tors, turning them all the way in and then out a little. When the screws are turned all the way in the bike will not start. I turned them a little out and the bike starts. Now when I run it, it really bogs down in low rpms , but is fine in the high r's. My question is if anyone know how many turns out those damn things need to be? I am getting the elim kit soon, but want to ride tomorrow. Any suggestions??

Dude, I was just messing with ya but I guess I hit kinda close to home. Anyway, just sell your Banshee and get the f#@k out of here you little punk. If you don't like your Shee sell it and then go ride your Craptor until your tranny takes a $hit on you. Also if I did know you, I would have to slap you like the little bitch that you are. Speed on before you get roosted on you little cry baby. Oh and another thing, don't be haten on my mom cause she hotter than yours!

Just sell your Shee and go pay to have your tranny fixed and quit bitchen!!

I did a Google search for Raptors and came up with these sites: www.canthandleatwostroke.com www.everypussyhasone.com www.some_r_fastsome_r_not.com www.getroostedbyashee.com Sorry couldn't resist

How much you want for the nerf's and if you sold the rear plastics, how much for the fronts? Send a pic of the nerfs also if you can.

Did you sell that front plastic with the cut fenders? If not how much you want ?

Kinda curious .... Was it the reeds or the parking brake????

Yes, I did use all new gaskets and I will check again to make sure everything is tight.

Will check those things when I get home. I am pretty sure that everything is connected, but I will check again to make sure. Any specific tips on checking for leaks?

O.K. Just rebult the top end with Wiseco 0.20 pistons, the rest of the bike is completely stock. Tried to start it for the 1st time and it would not fire. Put new plugs, made sure there was spark still no dice. Then pulled the plugs and poured some gas down the cylinders and put plugs back in and bingo and fired right up, but when i hit the trottle it would bog and die and would not restart. Pulled the carbs and made sure nothing was plugged or gummed up put everything back together and same thing. After performing this a few times the bike would start with the choke pulled out but after letting it run for a bit then hitting the throttle it would backfire (Only out the right side) and sound like it wanted to die at low rpms. Changed the needle clip position to all the way out to try and lean it out and then bike will now start on it's own, idle and run with the choke pulled out one notch without backfiring, but if I put the choke all the way in I am back to backfiring , no idle, no starting and over all running like shit. Sorry for the long post but I am going a little nutty. I am at 4300 elevation, stock bike except for .20 over bore and new pistons and ANY help would be appreciated. Could it be mains or something???

I don't know for sure , but that kinda looked fake to me??? The person never moved ...

Just something I came across and thought was pretty good: Giving the Finger Before the Battle of Agincourt in 1415, the French, anticipating victory over the English, proposed to cut off the middle finger of all captured English soldiers. Without the middle finger, it would be impossible to draw the renowned English longbow and therefore the English would be incapable of fighting in the future. This famous weapon was made of the native English Yew tree, and the act of drawing the longbow was known as plucking the yew (or pluck yew). Much to the bewilderment of the French, the English won a major upset and began mocking the French by waving their middle fingers! at the defeated French, saying, "See, we can still pluck yew!" PLUCK YEW! Since 'pluck yew' is rather difficult to say, the difficult consonant cluster at the beginning has gradually changed to a labiodental fricative 'F,' and thus the words often used in conjunction with the one-finger-salute! Also, because of the pheasant feathers on the base of the arrows used in conjunction with the longbow, this symbolic gesture is known as flipping the bird. (And yew thought yew knew everything!)

Hopefully my post wont kill the thread again ... Here's one. A MAN IS LYING IN BED IN THE HOSPITAL WITH AN OXYGEN MASK OVER HIS FACE. A YOUNG NURSE APPEARS TO SPONGE HIS HANDS AND FEET. "NURSE", HE MUMBLES FROM BEHIND THE MASK, ARE MY TESTICLES BLACK?" EMBARRASSED, THE YOUNG NURSE REPLIES, "I DON'T KNOW, I'M ONLY HERE TO WASH YOUR HANDS AND FEET. HE STRUGGLES AGAIN TO ASK, "NURSE, ARE MY TESTICLES BLACK?" FINALLY, SHE PULLS BACK THE COVERS, RAISES HIS GOWN, HOLDS HIS PENIS IN ONE HAND AND HIS TESTICLES IN HER OTHER HAND AND TAKES A CLOSE LOOK AND SAYS, "THERE'S NOTHING WRONG WITH THEM!" FINALLY, THE MAN PULLS OFF HIS OXYGEN MASK AND REPLIES," THAT WAS VERY NICE BUT, ARE --MY--TEST--RESULTS--BACK ?