flea49

The answer to your question is yes,it will run richer,drop your needle and it will run better but thats not the correct fix,you want to keep the needle in the middle clip,call, pro-flow.com,and tell the number on your needle and tell them you want a set of needles 2 sizes leaner the 6 clip series is better.

I have a set of new crome cpis out of frame,just stingers but the weld on the right pipe where the weld for the mount to the frame is,has a crack in it and is leaking,but they have no dents and the crome is perfect,do you make the rocket pipes that come out both sides without silencers?

250.00 shipped

I have mint head lights and tail light from a 02,85 shipped.

Iwill add a new set of pro-design 19cc and 20cc domes.

I HAVE A MINT CROME PLUS 6 SWINGARM THAT EXCEPTS A STOCK CARRIER,AND A NEW SET OF V-FORCE 2 REEDS ONLY HAVE 5 TRIPS DOWN THE TRACK,I WOULD LIKE A CROME PLUS 8 ROUNDHOSE WITH CARRIER,

Its not cheap but fullbore makes the all white front.

How much for the axle hubs and the brake drum and the rubber boot,and on a scale from 1 to 10 how do they look.

Most mikuni carbs are stiff,I always cut 4 rings off,

THESE ARE FOR A BANSHEE,THEY HAVE 64 SPIKES IN EACH TIRE,THEY ARE DUNLOP AND MOUNTED ON .125 BLUE LABEL RIMS,MOUNTED BUT NEVER RAN 350.00 tHESE WILL HOOK.DONT KNOW IF I CAN SHIP SO WOULD PREFUR SOMEONE CLOSE.iF INTERESTED I CAN SEND A PICTURE,AND I LIVE IN DUNLOW WV.

Anyone got a round house plus 10 with carrier they want to sell at a decent price.

NYUK,Tell me about the bottem,yeay any aftermarket stuff,picture,oh yell how much can you get me a plus 10 round hose swingarm with carrier bearing.

Nope.I ran a 7.27 on a 450es honda 4 wheel drive.

I bought a set of new 19 and 20cc on ebay as a package ,19 for sale for 60 shipped or trade fo a godd set of 18cc.

Iput mine togather a few weeks ago and thats about how mine did,only i had 36mm I had to go from a 280 main to a 360.So if you are getting few to the bowls go bigger on your main not smaller.

I think most ppl run .018

anyone have a good set for sale ,for a friend let me know.

I would go to the hardware store and buy 2 6mm bolts with a .125 thread pitch 1and 1/2 inches long,take a file and round the tips off just a little where they touch the slides,and buy 2 bolts to fit them and use them ,because the idle screw that comes with the toomey kit is a piece of shit and will vibrate lose.

I have a brand new set of 36mm tm mikuni carbs,foam filters and a new cable a extra set of dump tubes drilled .122 for alky,also new boosters was just added,these carbs comes with a mount for boosters,I would like to trade for a new set only smaller,or 350 bucks.I have pictures if you are interested send me your address.

I have full drag port by hole shot racing,cool head,17cc domes cpi pipes outside,1 to 4 override,

I bought a new set of 36mm tm mikuni carbs put them on my banshee and it starts first kick idles great and if you baby it it will rev out but if you punch it its just boggs plum down will not take gas. i have all the goodies so these carbs ought to work,they are still at stock settings 280 main,50 pilot.any ideas?

Anyone know what size pilots come in a set of 36mm tm mikuni carbs thanks.

If i did not already have a set,I would buy these,You guys that drag these makes a world of difference,I have the rz drum and forks,and a 1 to 4 override trainy,from mpracing,and it shifts better than a automatic,the forks has rollers on the tips and they help in the shifting.someone better get on these they are getting hard to find,By the way whats your bottem dollar??PM ME

The front are 12 inches eye to eye,adjust out 3 inches,The rear is 12 and one half,adjust out 3 more inches,These are threaded in not welded,very nice and light 160 plus shipping.I cant upload a picture,but if interested i can send you one.

I HAVE EVERY THING BUT THE CLIPS FROM A 02,AND MOST PPL DONT PUT THEM BACK ON,MAKE ME A GOOD OFFER INCLUDE SHIPPING WV 25511.