Jump to content

flea49

Members
 View Profile  See their activity

  • Posts

    238

  • Joined

  • Last visited

 Content Type 

Everything posted by flea49

  1. flea49
    The pitch is .125
  2. flea49
    The bolts you are talking about are 10 or 12 mm almost every bolt on a shee is 6,8 10,12 mm.
  3. flea49
    http://forums.atvconnection.com/messagevie...STARTPAGE/1.cfm
  4. flea49
    IF you drag race 12 inch struts all the way around.
  5. flea49
    I got a cromed banshee shifter i will trade you its sping loaded on the front and the crome is cracked in one of the joints but still looks good.
  6. flea49
    My son-n-law just twisted one out of true, it will not run on one side .
  7. flea49

    36mm Filters

    flea49 posted a topic in Wanted

    anyone have a good set with outer wares
  8. flea49

    Reeds Wanted

    flea49 replied to BansheeBoy17's topic in Wanted

    I am pretty sure that james lucky sells them on his site.
  9. flea49

    Swingarm Part

    flea49 replied to gbf4ever's topic in Wanted

    I ALWAYS GET MY PARTS ON TIME,BUT YES THEY ARE HIGH.
  10. flea49

    Swingarm Part

    flea49 replied to gbf4ever's topic in Wanted

    I lost one myself,and had to order one from alba,the cap oil seal and washer are 25 bucks.
  11. flea49
    I dont know the math on this But i am sure .100 over is not equal out to a 420 cc.
  12. flea49
    are the head and base gaskets new and is the base one piece
  13. flea49
    How old are they,Didnt know they made 35mm mikunis.
  14. flea49
    I am pretty sure www.vitos.com
  15. flea49
    www.pro-flo.com www.carbpartswarehouse.com
  16. flea49
    Nope you can move the big 5 inch spacer between the bearings over to one side,hold it over with a screw driver,then take something like a 6 inch extension set it on top of the bearing and drive the bearing out,move around it as you go,replace them with the new ones,i use a rubber mallot.
  17. flea49
    From what i can tell its not a over ride,so if it were me when you get the new gears do a pr-cut on 2 to 4 since that is when you are banging it the hardest,most of the gears have 6 dogs cut every other one out or off,but dont do 6th gear,you will not have that problem again.To find out how go to roostfest.com
  18. flea49
    I have ordered a few sets from tdr and the ones i order are 33 bucks .018 The carbon are 59 bucks so i would say they are .020,they say on top end with the thinner ones you will have some flutter but better throttle responce,and with the thicker ones better top end with no flutter.
  19. flea49
    make me a offer add 15 shipping
  20. flea49

    Carrier

    flea49 posted a topic in Wanted

    I need a good stock carrier.
  21. flea49
    Yep,it is sold, thanks
  22. flea49
    www.pro-flo.com
  23. flea49
    Any one know any web sites to help you do this.
  24. flea49
    I have a set .some one stripped the paint and tried to polish them,but did not do a good job,but could be painted ,and they tried to do a triple exhaust on one and screwed it up bored to high they are full drag ported,by who?100 plus shipping.
  25. flea49
    Ditch it.

BHQ Quick Links

×
×
  • Create New...