Leaderboard

Can’t seem to nail the mid range for jetting. Currently running 4mil with dune/trail port. 19cc domes and +4 timing with original rocket pipes running keihen 35’s. so far I have it set at 162 main and 68 pilot and clip in middle. I do run 50/50 pump/race I know race is harder to tell on plugs but besides that plugs have been showing a perfect colour. And elevation sea level.

You could literally run 20:1 - 100:1

1) What type of aftermarket exhaust do you have? Toomey T5s 2) What type of airfilter do you have? K&N Pods 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all D, no airbox at all 4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) Sea Level 5) What size pilot jets are you using? Stock (Might want to bump up...slight bog off idle) 6) What size main jets are you using? 350 Mains - No Airbox 7) What temperature is your Banshee jetted for? 70-105* (I'd be scared above that) 8) Do you have a port job? Not yet 9) What kind of carbs? Stock, w/o TORS 10) What size carbs? Stockers

1) What type of aftermarket exhaust do you have?Shearer inframes (smallbore) 2) What type of airfilter do you have?K&N Pods 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all D,Not at all 4) What is your elevation? (If you don't know, go here: http://www.topozone.com )sea level 5) What size pilot jets are you using? stock 6) What size main jets are you using?360 7) What temperature is your Banshee jetted for?any 8) Do you have a port job?agressive dune port fro HJR 9) What kind of carbs?Mikuni 10) What size carbs?stock -- But this is all going to be old news when I get new carbs very soonly. Thanks! No, Thank You

1) What type of aftermarket exhaust do you have?paul turner mids 2) What type of airfilter do you have?k&n pods 3) no airbox at all 4) What is your elevation? sea level 5) What size pilot jets are you using?50 6) What size main jets are you using?200 7) What temperature is your Banshee jetted for?60-75 8) Do you have a port job?hjr dune/hillsot port 9) What kind of carbs? pwk 10) What size carbs?35 mm 11)dek needle 3rd clip down 2nd shee 1) What type of aftermarket exhaust do you have?paul turner mids 2) What type of airfilter do you have?k&n pods 3) no airbox at all 4) What is your elevation? sea level 5) What size pilot jets are you using?50 6) What size main jets are you using?205 7) What temperature is your Banshee jetted for?60-75 8) Do you have a port job?tirnitys 400cc cub, w/cleanup port 9) What kind of carbs?pwk singel 10) What size carbs?38mm 11)eej needel 4th clip down

1) What type of aftermarket exhaust do you have? CPI Small Bore Inframe 2) What type of airfilter do you have? 6" K&N Clamp on POD's 3)No Airbox at all 4) What is your elevation? 2,400 Ft above Sea Lever 5) What size pilot jets are you using? 45 to 48's Depending on Air Temperature. 45's most of the time 6) What size main jets are you using? 155 7) What temperature is your Banshee jetted for? 80 Degrees 8) Do you have a port job? Patriot Racing 4mill Drag Ported Stroker 9) What kind of carbs? Keihin PWK 33's 10) What size carbs? 33 mm

1) What type of aftermarket exhaust do you have? Toomey T5's 2) What type of airfilter do you have? K&N with pro flow adapter 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all B 4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) Sea Level 5) What size pilot jets are you using? 29's 6) What size main jets are you using? 330's I AM RICH RIGHT NOW THOUGH!! (by one or two sizes) 7) What temperature is your Banshee jetted for? 70 Degrees 8) Do you have a port job? Na 9) What kind of carbs? Stockersssssss 10) What size carbs?

At 1500 ft of elevation, you could use 21cc domes and probably run pump gas safely all day long. 20cc domes would put you at the risk of MAYBE having to run 50/50 mix of pump and race gas. They do a few things: Cool better Look better Seal better and will give you a boost in bottom end with a little more compression PM DLNOSS here on HQ. He can answer any questions you may have...