Leaderboard

Leave it stock so.

Here is an arial from last weekend Sent from my Pixel 3 XL using Tapatalk

Delete kit come with cable? Do 1 carb at a time or make sure you don't mix up bowls & slides. shave down the end of the boss a little, you will be drilling, for idle screw holes, or it might not hit the slides enough to get a desired idle rpm. Put choke tube back on before firing it up. Look at piston #'s while you have the reeds out. iirc, some reeds require boot modifications to fit. Inspect boots for dry rot & do a leakdown test before running for piece of mind & intake gaskets tend to leak.

Pwk 28 flat slides, my jetting is 150main 50 pilot and jjh needle middle clip I agree, you don’t ‘need’ them but they are very nice carbs. I would never go back to stock. -Ben

Plug chops and leak down tests. Never done either of them. Proper assembly, jet it close and fine tune it in from there. JMO