jamebo Posted July 6, 2008 Report Posted July 6, 2008 Hey guys, tomorrow I'm ordering a chrome Cascade rear brake lever from RMATV. It's under the hundred dollar mark so I'm looking at some Cascade pipe clamps for my Fatty's to add with the order to save shipping. I just wanted to make sure that they were good clamps that seal well, does anybody on here use them with the Fatty pipes? As it stands I'm currently using the stock rubber hose things and the clamps on them don't tighten down all the way on one side of each pipe, which causes drops of gas to fall on the clutch cover every now and then. I'd rather add some bling than put regular hose clamps on it. Quote
Dave I. Posted July 6, 2008 Report Posted July 6, 2008 I had some and didnt really care for them...i just use 1" radiator hose and some t clamps Quote
Titan up Posted July 6, 2008 Report Posted July 6, 2008 I have the ones for the shearer pipes and I'm happy with them They clamp down tight and you can't twist them at all. Quote
jamebo Posted July 6, 2008 Author Report Posted July 6, 2008 I appreciate the replys, guys. I think I'm going to go ahead and order them and give them a try. Hopefully they'll work alright on the Fatty's, if not I can always use the clamps with the stock radiator hose pieces that I have. Thanks again, -Jamie Quote
FireHead Posted July 7, 2008 Report Posted July 7, 2008 I have the ones for the shearer pipes and I'm happy with themThey clamp down tight and you can't twist them at all. Word. The Cascade clamps are pretty much the best that is out there. :thumbsup: Quote
brugal Posted July 7, 2008 Report Posted July 7, 2008 Word. The Cascade clamps are pretty much the best that is out there. :thumbsup: cosign. Quote
jbooker82 Posted July 7, 2008 Report Posted July 7, 2008 The RIS ones work pretty good to. They use 4 viton orings to seal them up. Quote
jamebo Posted July 7, 2008 Author Report Posted July 7, 2008 Man those clamps look awesome, they really go well with the chrome pipes! I appreciate all the input on this matter, guys. Quote
Bansh-eman Posted July 8, 2008 Report Posted July 8, 2008 Cascade clamps are the best clamps to use on imframes IMO. Mine sealed better then any clamp I tried. And they look great Quote
xXBlessedWithDeathXx Posted July 8, 2008 Report Posted July 8, 2008 I have a set and they seal grate but i have one hell of a time getting them on after i pull the silencers off. its a pain in the ass to be honest but they work and look good. Quote
FireHead Posted July 8, 2008 Report Posted July 8, 2008 I have a set and they seal grate but i have one hell of a time getting them on after i pull the silencers off. its a pain in the ass to be honest but they work and look good. If you put some grease on the pipes before you slide the clamps on, you will never have the sticking problem again. :thumbsup: Quote
xXBlessedWithDeathXx Posted July 10, 2008 Report Posted July 10, 2008 If you put some grease on the pipes before you slide the clamps on, you will never have the sticking problem again. :thumbsup: Thanks :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.