biggun6ss Posted June 14, 2008 Report Posted June 14, 2008 Just had a 4 mill with a dune/drag port done on the banshee. Using 35 PWK so I have no need for the tors anymore. Have the bike torn down to nothing but frame and wirring harness. What all needs to be removed to get rid off all the tors junk. Is the little button inside the thumb throttle part of the tors and can that be unplugged? Quote
tundish2800 Posted June 14, 2008 Report Posted June 14, 2008 You can take all the wiring out and the little box on the left side of the frame under the gas tank. Thats should get you started Quote
shee4speed Posted June 14, 2008 Report Posted June 14, 2008 yeah,and remove the little buttons in the throttle and the parking break and get rid of the wiring.I used a little clear silicone to seal up the holes where the wiring goes in there. Quote
kwickez Posted June 14, 2008 Report Posted June 14, 2008 cascade also sells a polished plug for 20 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.