shakenbake1285 Posted May 2, 2008 Report Posted May 2, 2008 my bike is pretty new all stock no work done to it. just started cutting out when u give it gas, doesnt do it all the time. u can ride it for a few min. then it will start missing, if u rev it a few time it will run good for a few 100 yards then start missing again. doesnt matter if it is warmed up or not misses either way. i took the parking brake off. i changed spark plugs (br8se) it still misses. my gas is mixed 32.1 93oct castor 927 oil. Quote
freddy Posted May 2, 2008 Report Posted May 2, 2008 check if your air filter is clean. someone else probably can help you better. Quote
shakenbake1285 Posted May 2, 2008 Author Report Posted May 2, 2008 just checked the air filter its pretty clean Quote
jaredvh Posted May 2, 2008 Report Posted May 2, 2008 I have the exact same problem, Last time this happened I just replaced plugs but you said you already tried that. This time replacing my plugs made no difference. Possibly something to do with the timing? Quote
okbeast Posted May 2, 2008 Report Posted May 2, 2008 Do you still have the TORS, what are you mods? Quote
monster_energy06 Posted May 2, 2008 Report Posted May 2, 2008 Do you still have the TORS, what are you mods? x2 Quote
rubberneck Posted May 2, 2008 Report Posted May 2, 2008 Yep, if you still have the tors, unplug the controll box, parking brake switch, throttle switch carb tops and give it a try. If it runs good then, rip all that shit off, get an idle screw kit and new carb tops and be done with it. Quote
shakenbake1285 Posted May 2, 2008 Author Report Posted May 2, 2008 just took it to the shop where i got it from. they said they dont no how to work on 2 strokes they have to wait til they find someone who can. then they tried sayin i was runnin staight gas cuz they smelled the gas and said it wasnt mixed. ill try to take off all the wires from the control box Quote
Screaming Yellow Zonker Posted May 3, 2008 Report Posted May 3, 2008 The plug caps have resistors in them. I would take them off and OHM them and make sure they are good. Not sure of the spec I lost my book. I would also check the connectors on the top of the engine. make sure none are loose... Good luck. Quote
LS1Inferno Posted May 3, 2008 Report Posted May 3, 2008 just took it to the shop where i got it from. they said they dont no how to work on 2 strokes they have to wait til they find someone who can. then they tried sayin i was runnin staight gas cuz they smelled the gas and said it wasnt mixed. ill try to take off all the wires from the control box BULLSHIT if they cant work on two strokes they how the hel can they tell its mixed or not. Quote
shakenbake1285 Posted May 3, 2008 Author Report Posted May 3, 2008 yeah thats wut i said. i got into it pretty good with them at the shop. a buddy looked at it and said its probably the throttle switch. gonna try that this weekend. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.