Stator wire harness routing

[Snopczynski]

Who has pics of the stock stator routing under the carbs on the motor. Post em up. I need to see the stock way yamaha ran it, not what you have routed.

[06YFZ350]

Dam i wish some one would post a picture my stator harness rubbed on my pipes and melted the plug a little and i think it was just routed wrong.

[JUSTWANNARACE]

It should run across the top of the cases and set in the little hook on the the clutch cable hold down and out the right side to the back of the bike

[hoppedupandcutdown]

Lack of an airbox or broken clips on the right side of an airbox will facilitate creative routing to keep wires from melting.

[JUSTWANNARACE]

2 minutes ago, hoppedupandcutdown said:

Lack of an airbox or broken clips on the right side of an airbox will facilitate creative routing to keep wires from melting.

^^^ this

[JUSTWANNARACE]

That's why I will usually bring it up between the 2 carbs and to the back with most pipes. 

[06YFZ350]

I have the airbox and the clips on the side of it, Ill snap a picture tomorrow im installing a new harness right now.

[locogato11283]

It's pretty common to run it right along the clutch cable and out the clutch side.

I prefer that over running it between the carbs.