atvfreestylekid Posted April 8, 2008 Report Posted April 8, 2008 I just installed a set of yfz shocks on the shee and trying to get it all tuned right. Do I use an air compressor on the bottom of the shock rezys or is it for somthing other than air? Quote
airtite Posted April 8, 2008 Report Posted April 8, 2008 I just installed a set of yfz shocks on the shee and trying to get it all tuned right. Do I use an air compressor on the bottom of the shock rezys or is it for somthing other than air? I wouldnt use an air compressor on there....... have you adjusted the compression and rebound screws? and what about the preload adjustment? I had mine revalved on the 450 and that made a huge improvement over stock. Quote
atvfreestylekid Posted April 9, 2008 Author Report Posted April 9, 2008 I wouldnt use an air compressor on there....... have you adjusted the compression and rebound screws? and what about the preload adjustment? I had mine revalved on the 450 and that made a huge improvement over stock. The reason I'm asking is there is no pressure in the rezys. What do i need to put in them? and where do I get it? I have a race on the 20th and realy need to get these set up right by then. Do They have to have pressure in them? Thanks -Josh Quote
LS1Inferno Posted April 9, 2008 Report Posted April 9, 2008 its nitrogen. you can just go to the local air gas, praxxair or wherever and get a small tank and use a regulator so you can keep making changes to get it right. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.