jjmartin626 Posted February 25, 2008 Report Posted February 25, 2008 Ok i just rebuild my motor but i am looking for other things that will give me power increase any suggestions? MY REBUILD IS THE FOLLOWING: 4MM STROKER TRUED AND WELDED HOT RODS CRANK WITH TZ BEARINGS VF'S 3 35MM KEIHIN AIR STRIKERS BLASTER PISTONS DRAG PORT RECHAMBERD HEAD LIGHTENED FLYWHEEL OVERRIDE TRANNY T-5 EXHAUST 14/43 GEARING COMPRESSION AT 180 PSI I THINK THATS ABOUT IT Quote
sheefreak Posted February 25, 2008 Report Posted February 25, 2008 Who drag ported it? A drag pipe(inframe or out) should help quite a bit. Quote
shee rips Posted February 25, 2008 Report Posted February 25, 2008 drag pipes, and maybe a lockout. Quote
man27 Posted February 26, 2008 Report Posted February 26, 2008 Try an adjustable timing plate... Quote
Washburn Posted February 26, 2008 Report Posted February 26, 2008 more timing, a straight set of drag pipes like Shearer. T5s and CPIs work best for duning setups for drag setups you need a pipe that is going to rev far past any all around pipe. A Lockup clutch too. Override too if you have the money. Determin your gearing based on tire size and extra power with the pipes and timing. Damn I want a straight line Banshee they just arent practical where I ride. Quote
tnr Posted February 26, 2008 Report Posted February 26, 2008 Try an adjustable timing plate... Beat me to it.. Quote
jjmartin626 Posted February 26, 2008 Author Report Posted February 26, 2008 i already have my timing at plus four, but i was thinking of getting some drag pipes thanks for the info guys Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.