peeksville Posted January 29, 2008 Report Posted January 29, 2008 When I pull out the choke to try to start it up, it doesn't "stick" out. It will just shoot back in. Also, sometimes when it does stick and it starts up - - it doesnt seem to affect it with like the high idle and what not. Anything I can do to fix? Quote
inthemail Posted January 29, 2008 Report Posted January 29, 2008 if it helps, mine doesnt stick anymore either.... i just blip around with my hand holding it out untill shee's warm then forget about it :cool: Quote
okbeast Posted January 29, 2008 Report Posted January 29, 2008 You can unscrew it and try a new o-ring, but i had to just swap out another choke "stick" thing to get it to work. Quote
foxracing350 Posted January 29, 2008 Report Posted January 29, 2008 mine doesnt stick either i just hold it Quote
gumby6t9 Posted January 30, 2008 Report Posted January 30, 2008 Mine did this also, I replaced the o-ring and it is back to normal now. Quote
joneser4u Posted January 30, 2008 Report Posted January 30, 2008 yep, i have to hold mine out to. no problem for me. Quote
LS1Inferno Posted January 30, 2008 Report Posted January 30, 2008 There is a little metal clip that goes on the end that screws in under the rubber seal. I just am too lazy to buy a new clip i just hold it. Quote
FireHead Posted January 30, 2008 Report Posted January 30, 2008 Mine did this also, I replaced the o-ring and it is back to normal now. You can either do that or buy a new choke knob assembly from Yamaha...........they're like $20. Sometimes the o-ring doesn't fix it if the detents are worn out. :geek: Quote
wacko2000 Posted January 30, 2008 Report Posted January 30, 2008 Mine has been like that for the past 2 years, I just hold it out...No biggie.. I have looked into replacing it ad the cheapest Ive found it for is $33...I rather spend the money somewhere else on the shee... Quote
BigRed350x Posted January 30, 2008 Report Posted January 30, 2008 Mine has been like that for the past 2 years, I just hold it out...No biggie..I have looked into replacing it ad the cheapest Ive found it for is $33...I rather spend the money somewhere else on the shee... REDUCE THE SIZE OF YOUR SIG PIC!! Quote
MILO Posted February 8, 2008 Report Posted February 8, 2008 this is cool. i was going to get on here today and ask about this but i did a search first and of course, it's just another common banshee issue. this why the HQ kicks ass!! :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.