only 1 cylinder fires please help

[kodie]

well i havn't started my shee in a little over a month, i went to start it up and only 1 cylinder fired up. i shut it off changed the plug and it didn't help. it ran perfect when i brought it home from hatfield then i let it sit for over a month without fireing it and now im stuck with one cyl. i live in ohio its been snowing and cold could that be a problem? and i always keep it in the garage. somone also suggested that i try to pop start it is this a good idea, anyone else got any ideas. come around noon on sunday im gonna try to pop start it.

[sa3ood_banshee]

k first of all switch off ur bike lights,kill button(engine stop),turn tha key to off position,then close ur fuel cock ,then remove both plugs(put them smwere clean) and give her a couple of kicks ,u should feel that tha kickstarter kicks verry eassilly ,kick it about 6 to 7 kicks,then put tha plugs bak in and start her.try not to use choke, instead of pull starting her u can do this, tha guy who told u to pop or pull start is nows that u need to get her jugs a little cleaner,so just do this,it wont foul any plugs and it will save alot of energy, cheers :thumbsup: gd luk man

 

btw is tha plug fouling(the one on tha not working cylinder),and are u sure that there is spark on both the plugs,could happen :shrug:

 

 

sa3ood

[kodie]

hey i did all that kicked it about 10 times with no plugs and stuff. put it back on tried kicking it. now neither fired and i kicked it about 100 times

[scooter6101982]

did u check ur plugs to see if u have spark ? if so check ur main jets the same thing happend to me i was ridin and all of a sudden lost a cylinder my main jet fell out how i dunno but it did

[foxracing350]

i had mine start running on one cylinder so i bought a new ignition coil from ricky stator and the problem was solved

good luck

[2strokespirit]

just open your carbs and clean them out.

[WALLACE84]

i had mine start running on one cylinder so i bought a new ignition coil from ricky stator and the problem was solved

good luck

 

Ditto. Thats exactualy what I was going to say. Try that

[kodie]

hey im getting spark to my plugs now what do i check?

[scooter6101982]

check ur main jets like i said b4

[jbooker82]

Shoot a little carb cleaner in each plug hole and put plugs in and fire it up. If I let mine sit for a lttle bit and it is cold it only starts up on one cylinder. A little snap of the throttle brings both cylinders on line.

[sa3ood_banshee]

WTF!!!!!!!! :geek: ,is there a spark or no?? wat plugs r u running???,are ur pluggs gapped to spec???

 

 

sa3ood