Need help picking a color scheme

[Handyman]

Ok my axle is bent from my wreck..Should I PC the axle vein red and the sprocket and brake hub black or axle black and the srocket/brake hub vien red....I can't make up my mind..The PC will be done by Kaotik1 if you need to see what the vied red looks like

[Bansh-eman]

id do the axle in vien and the hubs solid

[allstarbanshee]

I wouldnt do the vein in a hi traffic area, the vein will eventually rub down and turn black, there is no cure for this. ITs just the natural tendency of the powder. A clear coat or as you mention a red top coat will help but in time it will still turn black. Just a thought good luck to ya.ive done the regular silver vein and ive topcoated it with blue, red, yelllow, green, purple, and orange. the blue and green veins are my fav.

[Bansh-eman]

i dont think that correct. the vien if im not mistaken is two seperate coatings hen a clear, so it will be no differant then a solid color. maybe kaotik1 will read this and chime in, he would know for sure

[kaotik1]

I dont think the axle will look right in red vein. I would do the axle black, and all the small things on it in the vein.

[Handyman]

I dont think the axle will look right in red vein. I would do the axle black, and all the small things on it in the vein.

 

That's what I was thinking.. i sat and stared at my axle this morning and visualized the different color schemes and I think the axle in black and the srpocket/brake hubs in the red vein will look best...plus the rear tire hubs are vein red already..

[jbooker82]

kaotik1 did my banshee frame.

Black Chrome with Clear Coat with Glitter.