2strokespirit Posted November 1, 2007 Report Posted November 1, 2007 This is locally produced, run this on my RZ buggy, I have a 2 into one air cleaner pipe with a K&N, with these pipea, first oversize, with a squish of 0,9mm (running without head gasket), stock porting, this thing on a dyno jet dyno 69HP. Anyways this motor is on a sidewinder buggy with a weight of 340kgs, with me and the buggie it weights 450kg (992lbs) this thing runs next to a piped DS650 on a 1/4mile, it tops out at 144km/h (90mph) This is the same pipes I am going to use on my RZ, its a mid to bottom pipe, but still awesome bottom end. I can say, noting but good things of these. Quote
2strokespirit Posted November 1, 2007 Author Report Posted November 1, 2007 (edited) Listen how this things pulls on th bottem end, this is 992lbs in total weight with 15-45 gearing on 22 maxxis sur tracks, 992lbs of weights and it pick up so easy without changing gears from the bottom, imagine in a banshee which has less weight how awesome the bottom must be. This is a RZ350YPVS 31k Edited November 1, 2007 by 2strokespirit Quote
DILUSI Posted December 11, 2007 Report Posted December 11, 2007 damn that looks fun lol sounds good to. but can i ask where did you get the flanges for the exhaust, if u have a set for sale let me know. Quote
Bansh-eman Posted December 11, 2007 Report Posted December 11, 2007 talk about the middle of fuking no where! Quote
2strokespirit Posted December 11, 2007 Author Report Posted December 11, 2007 damn that looks fun lol sounds good to. but can i ask where did you get the flanges for the exhaust, if u have a set for sale let me know. Its really easy to make yourself or any one with a lathe or so would be able to make them for you. Quote
2strokespirit Posted December 11, 2007 Author Report Posted December 11, 2007 talk about the middle of fuking no where! What do you mean? Quote
ClimbAnyHill Posted December 11, 2007 Report Posted December 11, 2007 kewl.. no head gasket? how do you get a seal? Quote
Bansh-eman Posted December 11, 2007 Report Posted December 11, 2007 What do you mean? i mean there isnt dick behind you in that pict, your in the middle of nothing it looks like. Quote
2strokespirit Posted December 14, 2007 Author Report Posted December 14, 2007 kewl..no head gasket? how do you get a seal? You lap the head and then use a THIN layer of silicon or gasket maker. NEVER had a problem and I run all my 2-strokes like that. Some big builders in the race world do the same, A Graham Bell's 2-stroke performance tunning book explains how, he recommends it as well. No gasket, so its a lot cheaper and no gasket can fail. Quote
2strokespirit Posted December 14, 2007 Author Report Posted December 14, 2007 i mean there isnt dick behind you in that pict, your in the middle of nothing it looks like. Thats the road in front of my house... but I am in the middle of nothing, I have to admit.. lol Quote
halfrack Posted December 15, 2007 Report Posted December 15, 2007 Sweet mini rail! Just curious to know how does it do in the sand? Quote
2strokespirit Posted December 15, 2007 Author Report Posted December 15, 2007 Sweet mini rail! Just curious to know how does it do in the sand? It is very good in the sand. Quote
DILUSI Posted January 1, 2008 Report Posted January 1, 2008 can you set me up with a set of flange extensions? Quote
2strokespirit Posted January 7, 2008 Author Report Posted January 7, 2008 can you set me up with a set of flange extensions? I am in South Africa, a bit far for flanges. They are really easy to make. Will see if I can get some photos. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.