RagunCajun Posted June 2, 2007 Report Posted June 2, 2007 (edited) tomarrow im shipping off my t6 pipes to someone who bought them. Is the rubber things on the silencers mounts included with the t6 kit. Also, are the clamps around airfilter to carb part including in the kit. I just want to make sure i send the guy everything. I bought the bike with them already on so i dont know what's included with the kit. thanx here's some pics http://www.2sly4.us/rc/codys_stuff/MyBansh...rb%206-1-07.JPG http://www.2sly4.us/rc/codys_stuff/MyBansh...st%206-1-07.JPG Edited June 2, 2007 by RagunCajun Quote
5150banshee Posted June 2, 2007 Report Posted June 2, 2007 tomarrow im shipping off my t6 pipes to someone who bought them. Is the rubber things on the silencers mounts included with the t6 kit. Also, are the clamps around airfilter to carb part including in the kit. I just want to make sure i send the guy everything. I bought the bike with them already on so i dont know what's included with the kit. thanx here's some pics http://www.2sly4.us/rc/codys_stuff/MyBansh...rb%206-1-07.JPG http://www.2sly4.us/rc/codys_stuff/MyBansh...st%206-1-07.JPG yes the silencer mounts go with the pipes but not the rubber deal for the carbs. Quote
BellicoseBanshee Posted June 2, 2007 Report Posted June 2, 2007 The 2:1 filter kit I purchased from Toomey did not come with clamps. I used the stock clamps that held the airbox boots to the carbs (as it appears is the case on your filter boot). I purchased billet front and rear pipe hangers when I installed my T5s, but I am pretty sure the kit came with rear hangers (the pipes sat around for a while before I installed them). You may want to call Toomey and verify, for their website does not specifically say, if I recall. They do sell replacement hangers, so it would make sense that the kits come with them. Hope that helps! :smile: Quote
RagunCajun Posted June 2, 2007 Author Report Posted June 2, 2007 (edited) ok so he will be getting the clamps in the carb for sure. As for the hangers....does the screw that holds it on to the frame and it's washer part of the t6 kit too? Edited June 2, 2007 by RagunCajun Quote
BellicoseBanshee Posted June 2, 2007 Report Posted June 2, 2007 If you are selling the "2:1 filter kit" with the pipes, the clamps are NOT part of the filter kit. I am not sure about the hardware, sorry. Quote
Bikeatrol Posted June 2, 2007 Report Posted June 2, 2007 ok so he will be getting the clamps in the carb for sure. As for the hangers....does the screw that holds it on to the frame and it's washer part of the t6 kit too? Iguess I'll chime in since I'm the buyer. Don't worry about the bolts and washers. I'll use the stock bolts. If they don't work, I'll find some that do. As far as the intake boot clamps, it sounds like I can use the stock ones so keep those. I definately need the rear hangers, if possible, though. Thanks again. Quote
RagunCajun Posted June 2, 2007 Author Report Posted June 2, 2007 ok man. Going gather it up and ship it. Thanx guys. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.