gsxturbo Posted May 14, 2007 Report Posted May 14, 2007 I have a sat of 32mm mikuni TM flat slides i am using on my shee right now with a 404 kit and was wondering if they would be to big for a set of stock cylinders, or should i go back to stock size carbs. I have a set of toomy T3s on it too Quote
swrbansheeboy Posted May 14, 2007 Report Posted May 14, 2007 i'm sure you can get them to work but personaly i would get a set of 28's, they will be easier to tune and have better response with a stock set of cylinders imo... Quote
SoCalinIt Posted May 14, 2007 Report Posted May 14, 2007 I wouldn't spend the extra money on different carbs... Keep those, you should be fine! Quote
jbooker82 Posted May 14, 2007 Report Posted May 14, 2007 Your fine. I run Keihin PWK 33's on my mx ported stock stroke cylinders. Quote
Animalman294 Posted May 15, 2007 Report Posted May 15, 2007 With a 404, you need to let that thing breath. Just use them.................... Quote
gsxturbo Posted May 15, 2007 Author Report Posted May 15, 2007 With a 404, you need to let that thing breath. Just use them....................Thats what i had them on, but a piston let go so i am going to put a set of stock cylinders back on for now. I have a set of stock carbs for it but i didnt know if the 32 mikunis would still work fine or not the stock carbs i have need a jet kit and filters before i could put them back on Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.