floydfan_90 Posted April 27, 2007 Report Share Posted April 27, 2007 Ok 2 stroke gurus I need some more help I just got my freshly ported cylinders back and I was wondering if I should port out my pistons to match my intake? If not y, would taking material out of the piston skirt damage the structural integrity of the piston? Quote Link to comment Share on other sites More sharing options...
shee rips Posted April 27, 2007 Report Share Posted April 27, 2007 I wouldnt, but thats just me. :shrug: Quote Link to comment Share on other sites More sharing options...
Screaming Yellow Zonker Posted April 27, 2007 Report Share Posted April 27, 2007 Every piston rocks in a cylinder. if you take material off you weaken the skirting which could cause it to break. if you do take any off dont do too much. you also mess with port timing. Ask someone like Jeff from FAST. Quote Link to comment Share on other sites More sharing options...
fastrthnu Posted April 27, 2007 Report Share Posted April 27, 2007 its been done, but Id leave it. If you take them to a machine shop they might be able to help, but doing it yourself, your going to need to match them right, ballance them right and not compromise the integrity of it. Unless your just racing and need to squeeze out all you can,. forgedaboudit. Quote Link to comment Share on other sites More sharing options...
5150banshee Posted April 27, 2007 Report Share Posted April 27, 2007 i would just leave it alone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.