Flanagans twin Posted April 24, 2007 Report Posted April 24, 2007 hey guys i was just wanting some advice from you guys on what i should get next? i was told a 2 into 1 carb.... then what? whats the next/best bigggest bang for my buck? what would i do to get the most out of it next? thanks! Quote
mpbanshee Posted April 24, 2007 Report Posted April 24, 2007 Three questions... 1. What mods do you already have? 2. What type of riding do you do? 3. How much money do you have? Quote
WALLACE84 Posted April 24, 2007 Report Posted April 24, 2007 From reading your mod list or mod wish list, if your going with 35 pwks and you already have porting, screw it and buy a 4 mill kit off ebay. Thats what I would do if I had your shee but then again, it all comes back to what type of riding you do. I do all around and alot of dragging/duning Quote
Flanagans twin Posted April 24, 2007 Author Report Posted April 24, 2007 trail riding and just all around messing around, adrenaline on wheels! haha and my mods are in my sig, im thinkin of a two into one instead of dual 35s? how much will i be spending for a 4 mill crank. and i can spend basically what i want i mean nothing too insane but prolly in the 500-600 dollar range.i want pure performance. enough to make me pretty untouchable by some competive quads, what would be the biggest improvement above porting. Quote
mpbanshee Posted April 24, 2007 Report Posted April 24, 2007 What are "powernow valves?" Looks like you have the basic bolt-on's covered. I would add a heavy duty clutch, and get the flywheel lightened. I am not a fan on the single carb, I love my dual 34's. Why do you want to change pipes? Your FMF's should work well with a good motocross port job. As long as you don't ride in alot of water, I would ditch the airbox and get some pod filters. You will probably see the most benefit out of a good set of +2 a-arms and some good shocks. Quote
!TWISTER! Posted April 24, 2007 Report Posted April 24, 2007 I never like 2:1 carb, if you want ''pure power'' get 2 carbs. Before buying anything else, i'll get my quad up to a builder and ask for a check up and tune. According to you port job, type of ridding, your engine ask what's next. Quote
EastCoast Banshee Posted April 24, 2007 Report Posted April 24, 2007 Motor looks pretty good from what i read in your sig. Id advise you to do all your suspension front and rear maybe a -1 or -2 swing arm then maybe get some PT mids and a 2 into 1 with a 35mm. Quote
Flanagans twin Posted April 25, 2007 Author Report Posted April 25, 2007 sounds good im still looking into some suspension componets n what not. how hard is it going to be to do yfz450 shocks on the front? with the grinding and everything? im going to be doing a new chain and possibly sprockets soon with a barnett hd clutch... Quote
EastCoast Banshee Posted April 25, 2007 Report Posted April 25, 2007 If your getting a new clutch contact jeff at FAST its worlds better than those pos barnetts. Quote
locogato11283 Posted April 25, 2007 Report Posted April 25, 2007 id stick with dual carbs. do some suspension shit. no sense having all kinds of power if you cant get it to the ground. Quote
Flanagans twin Posted April 26, 2007 Author Report Posted April 26, 2007 ok sounds good, so how about some yfz450 shocks in the front along with some +2 a arms, dual 35s, and a new clutch with hd springs from JEFF at FAST??? thanks guys Quote
peterlocal22 Posted July 31, 2007 Report Posted July 31, 2007 get the 2 into 1 carb there great for your type of trail riding and def. some a arms and shocks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.