fastrthnu Posted January 18, 2007 Report Posted January 18, 2007 ahhh I geet it now. So it is still injected i(vacuumed) into the crankcase first. I feel really retarded,. thats so simple. Quote
Infamous039 Posted January 18, 2007 Author Report Posted January 18, 2007 Thanks Guys. I didnt think about to Turkey thing, I am goin use that a suck it out, because it was only a quick spill not alot got inside the crank. Also how the hell do I install the rings on the piston????????? Quote
MDS2106 Posted January 18, 2007 Report Posted January 18, 2007 (edited) You can get special pliers made for spreading rings or take your time and spread them by hand and work down one side at a time.If you do the hand thing be careful its easy to break a ring. Edited January 18, 2007 by MDS2106 Quote
BigRed350x Posted January 18, 2007 Report Posted January 18, 2007 Just stick an air hose down in there and blow the shit out... duh. Quote
LiftdT4R Posted January 18, 2007 Report Posted January 18, 2007 Just stick an air hose down in there and blow the shit out... duh. Damn red, not veryone is an engineer on this board. :yelrotflmao: Meant to ask, are you a P.E.? I was thinking about taking the exam, but my job really doesnt care. Quote
Devans Posted January 18, 2007 Report Posted January 18, 2007 Hmm... My top end is torn apart also, i noticed last night i had some coolant in the left cylinder. I didnt think anything of it, just going to blow it out. Quote
boonman Posted January 18, 2007 Report Posted January 18, 2007 You could also tip the machine upside down. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.