magunit420 Posted January 13, 2007 Report Posted January 13, 2007 High i need to find a flywheel puller and im not sure what thread size and pattern. is M27 X P1.0L correct? for my 95 banshee Quote
Bansh-eman Posted January 13, 2007 Report Posted January 13, 2007 go online or to any dealership and you can buy a motion pro puller for like 12 bucks Quote
magunit420 Posted January 13, 2007 Author Report Posted January 13, 2007 go online or to any dealership and you can buy a motion pro puller for like 12 bucks yyeah i know where to buym but i already bought one and it didnt fit. so i need to find the RIGHT size and i dont no...... the one i got was one size to small i believe. Quote
Bansh-eman Posted January 13, 2007 Report Posted January 13, 2007 get one thats marked for yamaha... it should be universal for most yamaha bikes... Quote
magunit420 Posted January 13, 2007 Author Report Posted January 13, 2007 get one thats marked for yamaha... it should be universal for most yamaha bikes... yeah one other question.....how do use the multi meter.....like what setting do i put it on? and where do i put the pos and neg to check the pickup and stator and cdi? do i disconnect the wires and put the pos and neg into them and kick? or what the manual doesnt explain to good 4me to understand......im just a newb with a broken banshee still. Quote
nunyabinness Posted January 13, 2007 Report Posted January 13, 2007 dude, call jeff at F.A.S.T. he has flywheel pullers and for pretty darned in expensive. plus he can probably tell you how to check your electrical. he's a good guy. Quote
JET 99 Posted January 14, 2007 Report Posted January 14, 2007 (edited) if you are asking about the setting on a multi meter. the omega sign is resistence measured in ohm's **no power** checks circuit for short (low resistance) or open (high or infinite resistance).. the V w/wave is ac voltage.... alternating voltage checks voltage in ac form. depending on your meter is the range limit (polarity of leads shouldnt matter. red and black). the V w/-- is dc voltage..... direct current voltage " " dc form." "(polarity is a factor + is positive(red) - is negative(black).your display might read -12volts if your lead are reversed when actually it opposite.. if your not sure when looking at electrical print either get someone that really can read a diagram to help you in person.. talk to someone who is really knowledgable on a banshee( such as engine builder or a couple of the guys on here) best thing would be walk you through it while on the phone... you cant mess up to much on the banshee but you could blow your meter......... and a phone call to jeff would get you the correct flywheel puller and the info you desire on your elect issues Edited January 14, 2007 by JET 99 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.