a-arm banshee frame $100

[j28d]

As the title says, I have a banshe a-arm frame for $100. I got it with another banshee I bought. It doesn't have any vins, supposedly its's a factory replacement frame, However I can't gurantee it. I will give a bill of sale with the frame. I also have some other thing for sale.

 

Razr front tires-22x7X10-80-85% tread-have a few plugs,but hold air.50 shipped,60 shipped on honda rims( one rim is bent).

Pure sport bandits-22x11x9-70-75% tread-40 shipped, 50 shipped on honda rims(rims are slightly dinged, hold air)

Ohtsu radials-22x7x10 stock 400 ex tires 65-70% tread-35 shipped

Stock dunlops-22x7x10 stock yamaha tirs-65-70% tread-35 shipped

Pure sport fast trekkers 22/7/10 75-80% tread-40 shipped

Banhee 2 straight steering stems-40 each

Banshee air box with toomey filter-40 shipped

banshee stock front brake lines-26 shipped

banshee spindles and hubs-newer bearings-50 shipped

Banshee or blaster gas tank with petcock-30 shipped for either

04le and 96 swingarm, straight, no cracks-27 shipped-first one sold gets a factory skidplate.

Blaster coil-12 shipped

Banshee wiring harness-35 shipped

04Le black grill and tank cover(carbon fiber graphics), some cracks-30 shipped

Banshee clymer manual-15 shipped

200x/ex/sx/big red clymers manual-15 shipped

3 or 4 sets of banshee tie rods and ends-most are good-30 shipped

 

I accept paypal, postal m.o. or cash on pickup, If you pick the stuff up, I''sell it all for $250 or trade for 250r parts-+4 swinger, stuff above+cash for some lt shocks(19 in.), holeshot or razr 2 rear tires. You can contact me at 330-644-9252 or emal me a [email protected], Le me know and thanks for looking. looking

[bentvalve]

can i get some pics of the swing arm? [email protected] thanks don

[LiftdT4R]

Location?

[ThE_BaNsHeE_mAn88]

do the a arms come with the frame?

[j28d]

There's no a-arms with the frame, I'll get pics of the swingarm out tonight, and I"m in Akron, OH. If somebdy picks this stuff up, I have a whole bunch of various oem tires that I can throw in with this, just don't feel like rooting through the garage until somebody is here to take the stuff away. I also have a arctic cat 340 motor with a comet clutch that may be tossed in on local pickup if the guy who bought it on ebay doesn't show. Thanks for looking.

[HotCarl]

I'm interested in the frame. where are you at?

[j28d]

I'm at the edge of Akron/Barberton OH 44203.

I'll post some pics as soon as I figure out how to resize them.

I can meet halfway within reason(100-150 miles) for gas money.

thansks for lookoing

[bentvalve]

so i live in southeast ohio where is 150 for you we should try to figure half way for both of us. don

[j28d]

so i live in southeast ohio where is 150 for you we should try to figure half way for both of us. don

Yahoo maps says it's 170 total miles.

I guess I could meet you on 71 somewhere. Do you want all this stuff or just the frame? What day would you want to do this? Let me know, give me a call at 330-644-9252 or pm your # and I'll call you. I"m on dial up, so if it's busy, email me your # at [email protected]

 

http://maps.yahoo.com/dd_result?newaddr=&a...amp;tcountry=us

 

Let me know and thanks.

[CFM]

so i live in southeast ohio where is 150 for you we should try to figure half way for both of us. don

Yahoo maps says it's 170 total miles.

I guess I could meet you on 71 somewhere. Do you want all this stuff or just the frame? What day would you want to do this? Let me know, give me a call at 330-644-9252 or pm your # and I'll call you. I"m on dial up, so if it's busy, email me your # at [email protected]

 

http://maps.yahoo.com/dd_result?newaddr=&a...amp;tcountry=us

 

Let me know and thanks.

 

 

Are u close to Cincinnatti?

[j28d]

I think cincinatti is more like a 3 1/2 hour drive, depending on what side you live on> Thanks for looking, some stuff sold so list is updated.

[ThE_BaNsHeE_mAn88]

I think cincinatti is more like a 3 1/2 hour drive, depending on what side you live on> Thanks for looking, some stuff sold so list is updated.

you still have the frame?if so pm me i have the money in hand.

[bansheeryder_69]

If you still have the clymer manual shoot me a pm

[lammy chop]

pics of spindles and hubs please [email protected]

[astars25]

do you still have the air box?