CFM Posted December 7, 2006 Report Posted December 7, 2006 I have a bunch of these that need to go... Blemished meaning the chrome is not perfect, the arms themselves are not blems... $125 shipped or trades welcomed.... Buy them all for an even better price and make a couple bucks on Flea-bay, I don't have the time or patience with this divorce crap going on right now... Quote
sand rocket Posted December 7, 2006 Report Posted December 7, 2006 You have any pics on some of the blems, so that one now what to expect. Quote
b_sandgren Posted December 7, 2006 Report Posted December 7, 2006 You have any pics on some of the blems, so that one now what to expect. Are these for stock carrier or roundhouse? Quote
CFM Posted December 7, 2006 Author Report Posted December 7, 2006 Stock carrier, and I'm loading some pics now... Quote
Mullet Man Posted December 7, 2006 Report Posted December 7, 2006 Stock carrier, and I'm loading some pics now... have any powdercoated blems?? i'm not a fan of chrome Quote
CFM Posted December 7, 2006 Author Report Posted December 7, 2006 have any powdercoated blems?? i'm not a fan of chrome What size, color are you after? I'd have to go look in the shop... Quote
Mullet Man Posted December 7, 2006 Report Posted December 7, 2006 (edited) +2 - +4 black, silver, something like that. stock carrier Edited December 7, 2006 by Mullet Man Quote
CFM Posted December 7, 2006 Author Report Posted December 7, 2006 First 2nd As you can see, the welds were not smooth enough to put a nice bond from the nickel to the chrome.... Most just need a good clean/polish.. One more pic on the way. Mullet, I'll go check.. Basically I'm blowing this stuf out so I can pack up and move out of this place. Once I get to a new location, I'll be doing high end TIG'ed 4130 A-arms and swingarms .. Plus I picked up a big contract with Fastnal company to produce Sway bar bushings on a large scale, so this stuff needs to go... Quote
braxton Posted December 7, 2006 Report Posted December 7, 2006 First 2nd As you can see, the welds were not smooth enough to put a nice bond from the nickel to the chrome.... Most just need a good clean/polish.. One more pic on the way. Mullet, I'll go check.. Basically I'm blowing this stuf out so I can pack up and move out of this place. Once I get to a new location, I'll be doing high end TIG'ed 4130 A-arms and swingarms .. Plus I picked up a big contract with Fastnal company to produce Sway bar bushings on a large scale, so this stuff needs to go... needle bearings included? Quote
BANSHEEMANIAC Posted December 7, 2006 Report Posted December 7, 2006 do you happen to have a axel carrier? just asking. Quote
CFM Posted December 7, 2006 Author Report Posted December 7, 2006 do you happen to have a axel carrier? just asking. Stock or roundhouse? Got both Bearings included for 125 price on the chrome's +2 - +4 black, silver, something like that. stock carrier I've got this 2 inch black that the chaingaurd holes were drilled incorrectly, you would need to oblong the holes in the plastic or the steel to mount the gaurd.... 99 shipped Quote
Mullet Man Posted December 7, 2006 Report Posted December 7, 2006 (edited) or stock length. basically, PC blem in black or silver, roundhouse, in stock, or +2 length i jump alot and dont know if i really want a +4, but i will be porting it shortly... like other guy asked, they come with needle bearings? OK i see your edit, stock carrier or roundhouse? do you have something like that for roundhouse? Edited December 7, 2006 by Mullet Man Quote
CFM Posted December 7, 2006 Author Report Posted December 7, 2006 As I'm sure some of you have read that when I started the welds did not look "perfect" Here is a pic of the welds now on arms... Mullet, that pic is also of an 2 inch bare, same price correct spacing on the gaurd.. Just did not get it in on the last powder load. or stock length. basically, PC blem in black or silver, roundhouse, in stock, or +2 length i jump alot and dont know if i really want a +4, but i will be porting it shortly... like other guy asked, they come with needle bearings? OK i see your edit, stock carrier or roundhouse? do you have something like that for roundhouse? Gotta narrow it down a bit... 1) I've got a gloss black two that is not a color I use anymore, so it's considered a blem 2) Have the Tex black with the gaurd holes 1/4 too close, ream the gaurd and it's fine 3) Have a perfect bare one that just did not make it to powder 4) Have a bare round style and a carrier to go with it --- Not $125 range 5) No stock length. Above listed are all 2's 6) needle's come with unless otherwise stated Quote
Mullet Man Posted December 7, 2006 Report Posted December 7, 2006 pm sent, i will be buying atleast one of the above lol Quote
CFM Posted December 7, 2006 Author Report Posted December 7, 2006 Let me cut some of these open and show what I mean by a good clean... I want everyone to see exactly what will be recieved so there is no question... Back in a minute with pics Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.