Best Sand Clutch

[Bense]

What are you running and where did you get it?

[Toybreaker]

I run barnett steels, springs, and R1 fibers in a stock basket.

[BigRed350x]

I run FZR fibers, tusk steels, and some HD springs I got from (can't remember where) I was running that setup on my 4mil cub and didn't have any trouble with it.

[odaen]

$25 tusk clutch kit with 3 or 6 toomey springs

[csrmel]

whats all involved in running street bike discs? if i go to order them what year, model, etc should i be looking for?

[fastbanshee8]

whats all involved in running street bike discs? if i go to order them what year, model, etc should i be looking for?

 

Check with Jeff @ Fast Racing. I'm running one of his clutches, and if I remember right, it's an R6 clutch, but I'm not 100% sure.

[Bansh-eman]

all you need to get is the FZR 1000 fibers and stock steels... all year fibers are the same...

[csrmel]

ok so i grab some fzr1000 discs, what about cushons and plates. do the fzr discs work with stock plates and cushons or whats the deal with setting it up?

[Bansh-eman]

the cusions are part of your basket... use the cusions that your baskets has... the steel plates use stock banshee ones and ruogh them up a little bit with some sand paper... put the fibers and steel in just like normal and put your springs on and your done..