How to cut tires down ?

[[email protected]]

Want to cut every other row out of my razr's and well , what machine or tools do i need to do this..... I know if i attempted this with my own brain power, id have holes in my tires and un even cut marks. All help appreciated.

[oneslowbanshee]

Want to cut every other row out of my razr's and well , what machine or tools do i need to do this..... I know if i attempted this with my own brain power, id have holes in my tires and un even cut marks. All help appreciated.

 

 

 

 

The 1st set I done I used a butter knife and a 1lb propane bottle and heated the knife and done it that way it took for ever The redneck way but it worked the Right way to do it would be to buy a tire groover search ebay for a tire groover I can buy different size/width blades hope this helps

[[email protected]]

i will probly do the redneck way . I cant afford a 60 dollar groover .... would rather put that tords some new tires.

[sredish]

here's how i groove my turf tamers. makes for a KILLER tire.

 

 

[crazybluerider]

I found a guy locally that cuts sandrail tires. He only charged me 20$ to shave 2 tires any way you want them.

[locogato11283]

course wood blade and sawzall. thats how i cut my knarlys...works wonderfully..

[[email protected]]

course wood blade and sawzall. thats how i cut my knarlys...works wonderfully..

 

now thats more my style , im going to destroy the tires sometime this week

[[email protected]]

will i honestly stop spinning ( as much ) in the sand if i do this to my razars ?

 

 

i cant get power to the ground

[okbeast]

I wouldn't really think it would make that much difference in the sand. It seems like ur basically just making a "redneck" paddle tire. I would just invest in a paddle tire if you're havin trouble hookin up in the sand.

[[email protected]]

i agree , im going to leave those two treads cut off ....... its what i call CUSTOM !!!!!!! im going to get some new tires and stop all these freaking riggs.

[wesw]

horse hoof trimmer

[BigRed350x]

I made my own rig when I cut my last set of razr's. We took a thin metal bar and sharpened a nice edge on one side, welded a handle on either end then heated it up with a torch and slid it through the knobbies. Left a nice clean cut and if you are careful and don't try and take too much all at once you can get down pretty close to the tire without going through. Smokes a LOT though so don't do it inside a garage or anything.

[[email protected]]

only if i was as tallented as you , id do that..... im going to just get a set of something on rmatv seen some tires that look like theyll do exactly what im lookin for ( 120 shipped on rims ). i will use these for drag until i can afford the slicks.... im edging up to take her to the track soon... I just hope they will let me run.