TeamBigginRacing Posted August 9, 2006 Report Posted August 9, 2006 There is a rubber o ring that goes on the back of the clutch housing..was not there when got the bike!Clymer book pg.156/chapter six-- #17 do i need?????????? Quote
Bansh-eman Posted August 9, 2006 Report Posted August 9, 2006 i dont have my clymers here with me but your not refering to the o ring going on the kick starter are you? if so then yes you need it Quote
BigRed350x Posted August 9, 2006 Report Posted August 9, 2006 Just off the top of my head I don't remember any o-ring behind the clutch. Look at the thread I made about splitting the cases with walkthrough pictures and see if you can see the o-ring thing you are talking about in that topic. - jared Quote
Duner440 Posted August 9, 2006 Report Posted August 9, 2006 Im not sure where you are talking about. Is it inside the clutch cover or are you talking about the back side of the clutch cover insert? I cant think of any o-rings inside the clutch cover. Quote
J.J. Posted August 9, 2006 Report Posted August 9, 2006 (edited) If you look at the parts list below, you'll see there's no o-ring. The Pic#17 in the Clymers Ch.6 shows a big O-ring behind what they call the "clutch housing", or "Ref No. 5 PRIMARY DRIVEN GEAR COMP. " in the picture shown below. I also can not re-collect an o-ring there on my bike. Parts List Edited August 9, 2006 by J.J. Quote
TeamBigginRacing Posted August 10, 2006 Author Report Posted August 10, 2006 Just off the top of my head I don't remember any o-ring behind the clutch. Look at the thread I made about splitting the cases with walkthrough pictures and see if you can see the o-ring thing you are talking about in that topic. - jared ok...i was looking to see befor u replied..and yes i could see it..it's on the back of the housing brown o-ring! Went to the stealership and they said the only way u can get this o-ring is to buy the clutch housing...so i ask..do u need it...said nope not really just takes up some kinda noises or something....what ever...!!! ty guys cause i was stumped..looked all over BHQ..ty again!!! i know this is asked over and over...i'm installing a clutch best way to adj..i'm scared cause it's not my bike i'm doing the work on so some tips or detailed stuff on this is highly needed! something i could print out and read while i'm doing! it's a aftermarket clutch so the clymer kinda stumps me when talking about the stock stuff!!!! Bigred your splitting the cases thing is the sh*t!! I never done it don't look that bad now! Again ty 4in4 Quote
BigRed350x Posted August 11, 2006 Report Posted August 11, 2006 I still have no idea WTF you are talking about with this o-ring. Clutch housing means nothing to me. Are you talking about the clutch cover, clutch basket, what...??? There is no o-ring on the back of anything in the clutch area. The only o-ring on the clutch side of things is on the water impeller line where it goes into the clutch cover. I still have no idea what you are talking about. Take a picture of it and we can help you. Also, what are you doing working on someone elses stuff if you don't know what you are doing? Get a clymer manual if you are lost with something. :beer: Quote
TeamBigginRacing Posted August 11, 2006 Author Report Posted August 11, 2006 it's funny...u tell me to get a book cause i don't know what i'm talking about......i tryed to tell u guess i'm wrong!!!! Quote
TeamBigginRacing Posted August 11, 2006 Author Report Posted August 11, 2006 can someone post this pix 4 me Quote
Bansh-eman Posted August 11, 2006 Report Posted August 11, 2006 hey i looked at my clymers and the answer is no you do not need that o ring... i called hinson when i redid my clutch becasue it did not come with that ring... i know what your talking about now.. i also ask a few shops becasue it says something about the ring for stock clutches and they are not on a stock clutch when you buy the bike... but the answer is no you do not need that o ring... sorry for first reply about the kick starter i wasnt paying attention and didnt catch which o ring you wher tlaking about... Quote
TeamBigginRacing Posted August 11, 2006 Author Report Posted August 11, 2006 hey i looked at my clymers and the answer is no you do not need that o ring... i called hinson when i redid my clutch becasue it did not come with that ring... i know what your talking about now.. i also ask a few shops becasue it says something about the ring for stock clutches and they are not on a stock clutch when you buy the bike... but the answer is no you do not need that o ring... sorry for first reply about the kick starter i wasnt paying attention and didnt catch which o ring you wher tlaking about... ty very much.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.