ClimbAnyHill Posted August 8, 2006 Report Posted August 8, 2006 i'll perfect it on the second try with brand new material. i also cut off the headlight guards, i like the looks and that will have to do till some $$ comes along. Quote
hittintrees srh Posted August 8, 2006 Report Posted August 8, 2006 Looks good to me....nice and clean. Quote
Bansh88 Posted August 8, 2006 Report Posted August 8, 2006 yep! Oven vent screen is what I use. Quote
DRI4life Posted August 8, 2006 Report Posted August 8, 2006 i used the ac vent mesh from my ceiling... with the small holes.. it was perfect.... looks good man Quote
ClimbAnyHill Posted August 9, 2006 Author Report Posted August 9, 2006 Thanks all, appreciate the input! Quote
Lethaface Posted August 9, 2006 Report Posted August 9, 2006 (edited) Looks nice man..I havn't made one for my banshee but for my old blasty i used Gutter Guard..Turned out pretty good to.. Edited August 9, 2006 by Lethaface Quote
Dmcbanshee Posted August 9, 2006 Report Posted August 9, 2006 Nice homemadegrill :beer: This is mine on 2001 banshee Quote
flipcarre Posted August 11, 2006 Report Posted August 11, 2006 Nice grill Simon, those rears look a bit bald.. Quote
Dmcbanshee Posted August 11, 2006 Report Posted August 11, 2006 Nice grill Simon, those rears look a bit bald.. I make some donuts on asphalt with those rear tires :baseball_bat: Quote
dawarriorman Posted August 11, 2006 Report Posted August 11, 2006 Sheet of aluminum from lowes + ruler + drill press. Took me a couple hours, but I like it, and it only cost $10, with enough aluminum for 3 more. Quote
ClimbAnyHill Posted August 11, 2006 Author Report Posted August 11, 2006 Hey man, that's really nice on the blasty! Is that gutter mesh going on the Banshee? If so post that pic when completed! Nice homemadegrill :beer: Looks good too man! i used the ac vent mesh from my ceiling... with the small holes.. it was perfect.... looks good man Someone recomended the ac material but never found it, i don't know what it looks like. Got a pic for me? Thanks. Sheet of aluminum from lowes + ruler + drill press. Took me a couple hours, but I like it, and it only cost $10, with enough aluminum for 3 more. Looks mean!! Goes good on her!!! Quote
Justintoxicated Posted August 12, 2006 Report Posted August 12, 2006 Sheet of aluminum from lowes + ruler + drill press. Took me a couple hours, but I like it, and it only cost $10, with enough aluminum for 3 more. Damn man, my lowes charges like $20 for a piece of aluminum that size. I wanted to make a better PSU cover for my computer but after I went there I could have bought 1/2 a new case for less money! Quote
Lethaface Posted August 12, 2006 Report Posted August 12, 2006 Climb any hill~~ Thanks man.. I really havn't even tried it with the banshee.. I had H3 welds from ebay just make me a custom one..I may end up making one for a friend of mines banshee just to see what i can come up with..But to awnser your question yes it is gutter guard.. Quote
Yamashee1 Posted September 7, 2006 Report Posted September 7, 2006 i'll perfect it on the second try with brand new material. i also cut off the headlight guards, i like the looks and that will have to do till some $$ comes along. Dude just Today I made a new Grille for my Shee with the same Stuff. It was easy and Looks Real Good. Quote
powerman350 Posted September 8, 2006 Report Posted September 8, 2006 i feel really dumb now for spending a hunsky on a cascade grill :shoothead: those are some good lookin grills. good work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.