Dead Op Posted August 1, 2006 Report Posted August 1, 2006 Sunday I blew my motor. Rubber intake boot cracked sucked in air and there goes my right piston! I took it apart today and a tiny piece came off and and went out the exhaust...So it seems. there are no scratches whatsoever in the cylinders, and I found out I have a Hotrods Crank in it. :beer: Quote
Dead Op Posted August 1, 2006 Author Report Posted August 1, 2006 Sorry bout the shitty explanation, It seems a piece (very small) off the top of the piston chipped and made its way out the exhaust. I will post pictures today. Quote
Animalman294 Posted August 1, 2006 Report Posted August 1, 2006 That sucks that the boot cracked and fried the motor, but congrats on discovering the Hot Rods Crank. Do we see more power in your furture.....................? :beer: Quote
Dead Op Posted August 1, 2006 Author Report Posted August 1, 2006 Since I already got the crank what do I need to make a 4mm stroker. Quote
jbooker82 Posted August 2, 2006 Report Posted August 2, 2006 Since I already got the crank what do I need to make a 4mm stroker. A complete hot rods +4mm stroker crank.(I think you might need special pistons for the stroker crank as well) The plate that goes betweent the cylinders and cases, or cut domes for the stoker. Porting to take advantage of the different port timing that the stroker creates. Quote
BigRed350x Posted August 2, 2006 Report Posted August 2, 2006 search, its been covered a couple times on what all you will need for a 4mil. Or just read my sig. haha Quote
Animalman294 Posted August 2, 2006 Report Posted August 2, 2006 I keep readin' your sig but she won't hold still long enough............... :yelrotflmao: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.