bansheefire Posted June 22, 2006 Report Posted June 22, 2006 i was replacing my piston and i forgot to drain the head is this bad?? Quote
jankab Posted June 22, 2006 Report Posted June 22, 2006 i was replacing my piston and i forgot to drain the head is this bad?? You def want to get that coolant out of there before you fire it up (compressed air) Quote
bansheefire Posted June 22, 2006 Author Report Posted June 22, 2006 You def want to get that coolant out of there before you fire it up (compressed air) where do i apply the compressed air to get the coolan out of the crank case what do i do ?? Quote
Rustbag Posted June 23, 2006 Report Posted June 23, 2006 Just give it an oil change and you'll be fine. Quote
WinNuke2003 Posted June 23, 2006 Report Posted June 23, 2006 Just give it an oil change and you'll be fine. Yes but make sure you use peanut oil because it has a negative effect on gravity and shoots the water out of the crank casing where a two stroke should have oil! Quote
addicted Posted June 23, 2006 Report Posted June 23, 2006 Just give it an oil change and you'll be fine. Changing the oil will not get the water out of the crankcase. Quote
fastcar01 Posted June 23, 2006 Report Posted June 23, 2006 Just put a rag over the top of the crankcase and use a blow gun to blow down in there. ONce you get most of it out that way, take a rag, and crumple it up, then put it in the case and slowly spin the crank. You can stop when the rag gets to the bottom to let it soak up any excess. After you do this, apply some oil to the bearings, and spin the crank. No big deal. Quote
Rustbag Posted July 6, 2006 Report Posted July 6, 2006 oh shit, sorry for bad advice. brain not connected. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.