harley_sr Posted June 11, 2006 Report Share Posted June 11, 2006 Ok I have a 2001 banshee. Total rebuild almost done, will be complete when I trade off or sell. Frame and +6 swing arm painter Yamaha R1 Blue, a-arms, tie rodes, and steering stem all chrome, Fullbore front fenders, All extreeeeeemly clean. Every thing has been painted polished or chrome... Frame has been striped and lightened of all the BS brackets for a clean look.. Now for the good stuff. MOTOR 421 Cheetah Cub 4mil Stroker BRAND NEW!! Never Run Yet. I just got the motor back 2 days ago and have not even taken it out on the 1st ride yet.. HotRod 4 mil stroker w/ 5 mil Long Rods True and welded with HEAVY DUTY TZ bearings installed. Cases have been portmatched, lightened flywheel, Noss Machine head w/ special cut domes for 68mm bore. The motor will be 100% completely rebuilt with all new parts and seals. Have reciepts for every thing that goes on or in motor. The head will produce almost 185 psi of compression per cylinder.. 110 octane only.. Exhaust BRAND NEW CPI InFrame Drag Pipes CHROME.. Custom made heat wraps for stingers. Cascade Billet NO LEAK exhaust Clamps. Intake Brand New 35mm PWKS Clamp on Style K&N Filters w/ angle to clear exhaust pipes, Outter Wears UPP intake boots from carbs to Cylinders. Brand New V-Force III reed valves Adjustable timing plate set at +4 Chain and Sprockes... 100% the best you can Buy.. Sidewinder Ti-Moly 17/42 gearing Honestly there is soooo much stuff I have bought for this bike I can not remember. Brand New Douglass wheels front and rear, ASV Clutch lever, new cables, new chain guide, new bearings for swing arm, and new bushings in a-arms.. Too much to list Every thing said and done This bike will have close to 95HP... I have almost $5000.00 invested in this thing. And have a ton stock parts... I will post some pics. shortly.. I am ASKING $4500.00 I am in Lufkin Tx. and I would perfer pick up, but I can and will ship if needed. I just put the motor in Last night, I have not added gas to the tank yet. I will get it tuned up by this weekend and running. Here are some pics. of my progress. Also some more parts that are brand new, front and rear SS brake lines, billet front brake line clamps [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_126_full.jpg[/image] [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_125_full.jpg[/image] [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_124_full.jpg[/image] [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_123_full.jpg[/image] [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_122_full.jpg[/image] [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_121_full.jpg[/image] [image]http://memimage.cardomain.net/member_images/12/web/804000-804999/804457_120_full.jpg[/image] Also I may sell just the motor alone for $3000, motor has never been run. If I sell the motor I will part out the rest !!!! Quote Link to comment Share on other sites More sharing options...
trex banshee Posted June 11, 2006 Report Share Posted June 11, 2006 I am not seeing any pics???????????? Quote Link to comment Share on other sites More sharing options...
bansheefreak Posted June 11, 2006 Report Share Posted June 11, 2006 (edited) here ya go i put them on here right for ya... Edited June 11, 2006 by bansheefreak Quote Link to comment Share on other sites More sharing options...
IamKazam Posted June 11, 2006 Report Share Posted June 11, 2006 Willing to part out? Quote Link to comment Share on other sites More sharing options...
harley_sr Posted June 11, 2006 Author Report Share Posted June 11, 2006 Willing to part out? I will only part it out if I sale the motor first... Complete BRAND NEW MOTOR 100% all new never even started it up yet, and was built by HRI PowerSports. 421 Cheetah Cubs, HotRod Crank 4 mil True and Welded, TZ bearings on crank, all new seals, cases have been port matched, Noss Head Black anodized w/ 20cc Cub Domes, Lightened Flywheel Timing advance plate all with complete tear down and inspection... No chain brake on the case 100% perfect!!! $3000 obo for motor alone. Quote Link to comment Share on other sites More sharing options...
odaen Posted June 11, 2006 Report Share Posted June 11, 2006 Is the bike complete? If so, if you still have the bike in a couple of days, I'll most likely be interested in the complete bike. Quote Link to comment Share on other sites More sharing options...
FasterThanU90 Posted June 12, 2006 Report Share Posted June 12, 2006 20cc domes at 185 psi really? i have 20 cc domes in my cub and can run pump sounds like u have about the same motor setup Quote Link to comment Share on other sites More sharing options...
Toomey Banshee Posted June 12, 2006 Report Share Posted June 12, 2006 Nice bike!! I like the heat wrap on the stingers. What did you do that with? What did it cost you? Thanks. Quote Link to comment Share on other sites More sharing options...
harley_sr Posted June 12, 2006 Author Report Share Posted June 12, 2006 Is the bike complete? If so, if you still have the bike in a couple of days, I'll most likely be interested in the complete bike. Yes I have every thing to complete 100%. I just have not put it all back together. I am working on that now. Any one with any questions feel free to call 936-676-1179 Sam Nice bike!! I like the heat wrap on the stingers. What did you do that with? What did it cost you? Thanks. Got them from cascade atv.. Quote Link to comment Share on other sites More sharing options...
harley_sr Posted June 13, 2006 Author Report Share Posted June 13, 2006 B U M P I wil sale the motor complete with the BRAND NEW upp intake boots, v-force III reeds, 35mm PWK's, Clamp on Filters, Noss Head, and CPI Pipes for $3250 shipped. FIRM. If motor Sells I will part the rest out. Quote Link to comment Share on other sites More sharing options...
stuntmasta3o5 Posted June 13, 2006 Report Share Posted June 13, 2006 Damn man.. If I had the money.. I would buy it so bad... Good luck man.. :: Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted June 13, 2006 Report Share Posted June 13, 2006 Looks really clean................... :beer: Quote Link to comment Share on other sites More sharing options...
Rock-46 Posted June 15, 2006 Report Share Posted June 15, 2006 Free bump for a nice bike! Too bad your in Tex. Quote Link to comment Share on other sites More sharing options...
odaen Posted June 15, 2006 Report Share Posted June 15, 2006 Free bump for a nice bike! Too bad your in Tex. bike has a pending sale Quote Link to comment Share on other sites More sharing options...
ceojab Posted June 20, 2006 Report Share Posted June 20, 2006 did you end up selling. Let me know cause i am interested bike has a pending sale Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.