dashee03 Posted June 1, 2006 Report Posted June 1, 2006 How does a camed, piped 440ex do against the new 450s or a banshee. My friends getting 1 so i was just wondering Quote
MudSlinger09 Posted June 1, 2006 Report Posted June 1, 2006 doubt it will keep up for more than 20 -30 foot ... if that , once tha shee gets in the "zone" you will show your friend wats up Quote
spunmonkey Posted June 2, 2006 Report Posted June 2, 2006 a worked up 440 still is not as fast or powerful as a stock 450 so i am told. As long as your not bone stock and dont have a fear of WOT you will beat him. Quote
MudSlinger09 Posted June 2, 2006 Report Posted June 2, 2006 what bout a 440 with +4.5 mm stroke ... idk itd still suck Quote
2bzy2p Posted June 2, 2006 Report Posted June 2, 2006 that doesnt do much for the 400 ex vs 450s just some more umff but not enough Quote
Banshee~ Posted June 2, 2006 Report Posted June 2, 2006 (edited) what bout a 440 with +4.5 mm stroke ... idk itd still suck It would be better than your fourwheeler, really 400ex's are good bikes. You cant hardly break them. It will smoke a stock banshee pretty good, but not your ported banshee. If he ported it and polished it and put a 440 kit in it, then it have around 45-50 hp id say. A piped/hot cam stage 2 400ex will beat a stock banshee, so go figure. Edited June 2, 2006 by Banshee~ Quote
twincylinder Posted June 2, 2006 Report Posted June 2, 2006 A piped/hot cam stage 2 400ex will beat a stock banshee, so go figure. I dont think so... Quote
g-rider Posted June 2, 2006 Report Posted June 2, 2006 Not really sure about a 440 ex but I have a friend that has a 416 ex with cam, port & Polish, full pipe, air filter, CDI Box, 39mm FCR Carb, All of that junk. It actually runs decent But still no match for a ported Banshee. My banshee is pretty much stock except for pipes, Ported and cool head and I can beat him by about 3 bikes in 300 ft. and just keep pulling on him. He is about 1 1/2 bikes behind a stock 450. A 400 ex motor is just too outdated. I think instead of changing the plastic they should have updated the motor instead. Atleast to try to make it run with a z400. Quote
DaFish Posted June 2, 2006 Report Posted June 2, 2006 i smoked a stock one lasted weekend everytime i raceed him and its had a pipe thats it Quote
txblueshee Posted June 2, 2006 Report Posted June 2, 2006 that doesnt do much for the 400 ex vs 450s just some more umff but not enough Excactly... about the same as putting pipes on a 'shee... i smoked a stock one lasted weekend everytime i raceed him and its had a pipe thats it I hope so.... The ex's are turds unless you bomb them to 465 alky drag bike... then it's still slow as shit considering it's a "drag" bike... You buy an ex one of three reasons.. or maybe all the above.. 1. Your a chick 2. Your a noob/young kid 3. You need a play bike Mike Quote
MudSlinger09 Posted June 2, 2006 Report Posted June 2, 2006 It would be better than your fourwheeler, really 400ex's are good bikes. You cant hardly break them. It will smoke a stock banshee pretty good, but not your ported banshee. If he ported it and polished it and put a 440 kit in it, then it have around 45-50 hp id say. A piped/hot cam stage 2 400ex will beat a stock banshee, so go figure. are you talkin bout beatin a shee on a straight line or on the track???? if the 400 ex is a OHC motor then i can see why its tough to kill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.