latheboy Posted May 10, 2006 Report Posted May 10, 2006 I am brining an 87 back to life. I bought some stock carbs from a 2000 or so banshee to put on it. The TORS plug on my harness will not plug into these leads from the carbs. The wires are the same colors, but the plug is a different style. Anyway, i want to just bypass the TORS system anyway. I do not want to buy a removal kit, I already got too mush cash in this thing and its not running yet. So, if I unplug the TORS box, and the TORS plugs from the carbs, and the TORS plug from the throttle cable, will that bypass the system? Quote
ssanddemon Posted May 10, 2006 Report Posted May 10, 2006 NO. You must install an eliminator kit.- It has the idle stop screws. If the carbs you bought already have the screws intalled, then you are all set. If not, you will have to buy a kit or connect the wires and use the TORS carb tops. It won't idle otherwise. Quote
watkins Posted May 10, 2006 Report Posted May 10, 2006 I am brining an 87 back to life. I bought some stock carbs from a 2000 or so banshee to put on it. The TORS plug on my harness will not plug into these leads from the carbs. The wires are the same colors, but the plug is a different style. Anyway, i want to just bypass the TORS system anyway. I do not want to buy a removal kit, I already got too mush cash in this thing and its not running yet. So, if I unplug the TORS box, and the TORS plugs from the carbs, and the TORS plug from the throttle cable, will that bypass the system? 513889[/snapback] If the carbs have the stock caps then all you need to do is unplug the tors box itself and your set. Only need the removal kit if you want to remove the stock carb tops. Quote
latheboy Posted May 10, 2006 Author Report Posted May 10, 2006 Will it run ok if I disconnect the TORS box and the connection by the carbs? (I cant connect the carbs to my harness) Quote
watkins Posted May 10, 2006 Report Posted May 10, 2006 Should run fine... your carb tops are the stock type correct? Quote
DIRTMAN350 Posted May 11, 2006 Report Posted May 11, 2006 It will run fine. I have unplugged it on miy 98 and it runs perfect. I would like to do the tors removal but do not want to mess up my carbs. Quote
latheboy Posted May 11, 2006 Author Report Posted May 11, 2006 Well this project is on hold once again. I got some stock carbs from a guy here on BHQ. He sent them with both the same slides. I got hosed big time. Paid $55 for a set of carbs and now I need a $73 slide. fhker Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.