bansheezer Posted April 5, 2006 Report Posted April 5, 2006 My banshee starts up and idles way to high, but the idle is turned all the way down on the carbs and on the throttle, i dont know what else to do, please help, the tors is unplugged also Quote
steveodo Posted April 5, 2006 Report Posted April 5, 2006 i had something like that happen to me. it was hard to start then rev high wouldnt turn off , had to hit the gas with the key off to bring it down. Mine was both pilot jets were clogged. so try cleaning the carbs . if that dont work check for an air leak. Quote
bansheezer Posted April 5, 2006 Author Report Posted April 5, 2006 Ill pull the carbs but I was also wondering if the slides on the carbs are supposed to go all the way down if you look in at the airbox when the idle is turned completely down? Mine are still up a little bit and i also heard it could be because it is to lean, I have the needle set one notch leaner than stock Quote
biggun6ss Posted April 5, 2006 Report Posted April 5, 2006 If you adjust the idle screws all the way down, no the slides won't bottom out. With it running get some carb cleaner and spray it around where the reeds and intakes are. If there is a difference in idle then you have an air leak which will make your bike idle high. Make sure your slides are opening and closing at the same time also. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.