Bansheeman1121 Posted April 1, 2006 Report Posted April 1, 2006 I finally wanna get a port job, and bien that i cruise the back country roads on my bansh, mid top end port would be dead sexy, so any suggestions of who i can have do it, price and how long it takes? Thanx for any help Quote
Wallrat Posted April 1, 2006 Report Posted April 1, 2006 It really depends, but $300 is about average. Turn-around time can be anywhere from one to several weeks, depending on how busy the builder is. Quote
Thoughtshewas18 Posted April 4, 2006 Report Posted April 4, 2006 well actually I just went a got my cylinders ported just a .020 over stock. It cost me 100 dollars in arizona here. Only took 2 days as well they did very well. The piston kit (wiesco with gasket set) was 140 on top of that and I put it together and such. Thats about what ur looking at between that and the gas / oil to run through it. Quote
80overShee Posted April 4, 2006 Report Posted April 4, 2006 well actually I just went a got my cylinders ported just a .020 over stock. It cost me 100 dollars in arizona here. Only took 2 days as well they did very well. The piston kit (wiesco with gasket set) was 140 on top of that and I put it together and such. Thats about what ur looking at between that and the gas / oil to run through it. 497158[/snapback] Thats dirt cheap .......sounds to me like you paid for a BORE job....not a port job. Quote
Dinner Posted April 4, 2006 Report Posted April 4, 2006 Thats dirt cheap .......sounds to me like you paid for a BORE job....not a port job. 497172[/snapback] I agree They dont tell you how many thou they take off when they port do they Quote
sheefreak Posted April 5, 2006 Report Posted April 5, 2006 You got took on that bore job by the way. Quote
endofitall9 Posted April 5, 2006 Report Posted April 5, 2006 get ahold of jeff at fast........he'll hook you up heard alot of good stuff about him...going to send an extra set of cylinders to him myself when the time is right.........Eric Gorr.........well I don't know on mid to top anyway hes got my cylinders turn around was supposed to be 2 weeks well this is week 4 and no cylindres good luck Quote
Bansheeman1121 Posted April 5, 2006 Author Report Posted April 5, 2006 Thanx for the help I been talkin to a fellow hqer bout doin the buisyness, so hopefully i get everything in order and get this shee on the road but ty again for the help keep the advice comin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.