Turbobanshee_kid Posted March 31, 2006 Report Posted March 31, 2006 I have a 1999 banshee with a 2005 engine that has a milled head,wiseco STD pistons, TDR HIGH PERFORMANCE REBUILT CRANKSHAFT trued to .001" and welded,Ricky Stator fly wheel and 200watt stator also timing plate is at +4 or +5. This summer i am getting my engine ported, but i would like to get The Aftermarket Carbs for the Banhsee before then because i have the money know. Some one help! Quote
Turbobanshee_kid Posted March 31, 2006 Author Report Posted March 31, 2006 O yeah i live in Florida and I trail ride and Race on sand and Street 1/8 or 1/4mile I have STD cards right now. Quote
350TwinDeathBed Posted March 31, 2006 Report Posted March 31, 2006 (edited) Take it to eBay and find yourself some Keihin PWKs 30-35mm depending on how serious your port is going to be. Or buy these: BHQ Lectrons $300 Edited March 31, 2006 by 350TwinDeathBed Quote
fastbanshee4u Posted March 31, 2006 Report Posted March 31, 2006 28 mm, and they fit your intakes.You dont need huge carbs on a banshee to get great performance. Quote
gipperz Posted March 31, 2006 Report Posted March 31, 2006 Call Jeff at F.A.S.T. He goes by fastoys on here. He hooked me up and probably hook you up as well. His prices I feel are as good as anybodys , including e-bay.He can also tell you what you really need. Good luck to you. Quote
Wicked98Shee Posted March 31, 2006 Report Posted March 31, 2006 (edited) if your draggin' then i would look to some pwk 33 or pwk35 depending on where your goin with ur porting. in theory a smaller carb venturi should give quicker throttle response due to the increased velocity of the air passing thru the carb .. LOL guess i hadda brain fart LOL Edited March 31, 2006 by Wicked98Shee Quote
locogato11283 Posted March 31, 2006 Report Posted March 31, 2006 depends on how big ur goin with ur motor. if ur stayin stock stroke id prolly run 33mm pwk, 4mm id prolly run 35mm pwk..any bigger and youll want 39s... Quote
Turbobanshee_kid Posted April 1, 2006 Author Report Posted April 1, 2006 28 mm, and they fit your intakes.You dont need huge carbs on a banshee to get great performance. 495364[/snapback] What the # over there? Quote
wesw Posted April 1, 2006 Report Posted April 1, 2006 the thing on ebay is from carb parts warehouse. dont know the number or any other info. they sell around 180 bucks i put some on my brother in laws bike last week. if you get them they dont fit teh stock box very well. it made is bike run quite better. but his jetting was way off on his stockers. best of luck Quote
wesw Posted April 1, 2006 Report Posted April 1, 2006 http://cgi.ebay.com/ebaymotors/30MM-D-slid...627686382QQrdZ1 here is a link you might try. Quote
Turbobanshee_kid Posted April 1, 2006 Author Report Posted April 1, 2006 They well be running for the stock airbox Any one have Jeff's # Quote
gipperz Posted April 2, 2006 Report Posted April 2, 2006 Jeffs #785-364-5325,He's swamped right now, leave him a message on his answering machine. He will call you back. Quote
wesw Posted April 2, 2006 Report Posted April 2, 2006 you can get some rubber adapters from a hard ware store. to butt up to a box. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.