BansheeGuy_IV Posted March 17, 2006 Report Posted March 17, 2006 I am almost positive they were from Fast Forward Motorsports. They were designed to make more horsepower, higher in the RPM range, than the Toomey T-5's... They claimed about 6 horsepower more. I never saw any kind of dyno runs or anything so I can't tell you if it was true. The shop is completely out of business as far as I know. BG Quote
rocketboy Posted March 17, 2006 Report Posted March 17, 2006 im 99% sure they are power pros inframes and a very good inframe pipe that cost 450$ new Quote
Meat Posted March 17, 2006 Report Posted March 17, 2006 (edited) Here's a nice picture of my CPI's..... the pipes in the Ebay picture looks awfully close to these CPI's. When I first looked at the Ebay picture I thought "they're not CPI's"..... but they're frickin' close. MY CPI PIPES....... EBAY PIPES...... Edited March 17, 2006 by Meat Quote
Mullet Man Posted March 17, 2006 Report Posted March 17, 2006 since you folks are talking pipes, which are the that ones criss cross each other inside the frame? Quote
350TwinDeathBed Posted March 18, 2006 Report Posted March 18, 2006 (edited) Those are not name brand at all; not FMF, not Toomey and certainly not CPI. They look to me like a cheap knockoff of inframe drag pipes. CPI wouldn't let a product of that quality (or lack of) leave the shelves. Edited March 18, 2006 by 350TwinDeathBed Quote
350TwinDeathBed Posted March 18, 2006 Report Posted March 18, 2006 Not to mention, if they were quality pipes, the 'Buy Now' wouldn't be $100 Quote
decon Posted March 18, 2006 Report Posted March 18, 2006 i believe those are dynoport twin pipes Quote
89Steeda Posted March 18, 2006 Report Posted March 18, 2006 I'll second the Dynoport. And the crisscross pipes are, I believe, Paul Turner's. Quote
sredish Posted March 18, 2006 Report Posted March 18, 2006 those really aren't that bad for $100 at all. a little steel wool and those can be looking pretty damned good if you ask me. I've cleaned up pipes that look way worse than that. Quote
sp1tekiller Posted March 18, 2006 Report Posted March 18, 2006 If I had a Shee I would buy them. They look like dyno ports to me. Quote
. Posted March 20, 2006 Report Posted March 20, 2006 the beginning and the end of the pipe look exactly like LRD's. Maybe someone took an adjustable set and welded a piece in the middle? Quote
stuntmasta3o5 Posted March 20, 2006 Report Posted March 20, 2006 I'm pretty sure those are DG pipes? .. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.